JP1 Remotes

successfully build the cable, however which use program for PC communication -> URC and which use program to extract the codes?
excuse my lack of knowledge, I am willing to learn.
thank you.

Here are the needed connections: JP1.4 ---> FTDI Signal Name
Pin
1 --------------- Not connected or +3.3/5 volts
2 --------------- RTS
3 --------------- Ground
4 --------------- TXD
5 --------------- Do Not Connect!
6 --------------- RXD
The Brazilian adapter doesn't seem to provide RTS, so ...

3298 is the same signature as the USA model OARI06G, so once you have a cable, RMIR should work, although it will tell you that you have a OARI06G. Perhaps the 7960 button names will be different.

This is a JP1.4 remote, so you might be able to make it work with the Prolific USB to TTL, but our ...

Given that we can buy a ready made cable for under $9, it's been a real long time since most of us have bothered trying to make our own cables.

ok, I do not mind paying $ 9, I'm in Brazil will take to get this cable, so I want to learn to do this for me a bit confused about the cable this link ...

I still have doubts about how to build the same cable, I have a USB-to-RS232 Db9 PL2303_Prolific male, and I've done a cable at one end 6x pins as I do the cable so that it is compatible with my URC-7969?

there are some codes in my URC eg E124001 / URC 11-7969 R00 / S3F80KBX4C-COCB And talves can ...

3FG wrote:I'm not familiar with the 7969. Please check the signature of your remote using the 983 Signature Blink back command. It may have 5 digits, so check numbers 1 through 5.

I took the test, check the result was 4 digits: 3298 clik in TAP 1, 2, 3, 4.

I found what type of cable should I use in JP1 URC 7969 JP1 JP1.2 or JP1.3 in RemoteChart_C file only found on URC 7962 can help this doubt?


URC-7962 Smart Control Motion OneForAll 6 pin Y 6 Y MAXQ612 204907 US

thank you.

I gave the exact steps on how to make an upgrade from the LIRC file . And I uploaded the resulting upgrade . You can convert the upgrade to a Slingbox bin file using these instructions .

Note however, that the existing Spider bin file has the same functions as the LIRC file, plus some functions ...

But still I want abrender how can I use my codes extracted from WinLirc and convert them to .bin to use the Slingbox.
You should be able to import the Lirc file into IRScrutinizer and have it give you the information necessary to build a JP1 upgrade, but I couldn't figure out how to do it.

I ...

Yes, I understand the issue of 2x pages, as I said my knowledge is little and as premeiro test in S1001 did not need to use the external IR Slingbox, I just had the idea of using the external after much research on yotube which saw an explorer using IR extender, was in this way that worked.

I am ...

...but had to use the IR Extender Slingbox plugged in Slingbox in IR port and let the front sensor to IR
I thought that was the only way to have Slingbox control other devices, what was the other method that you tried?

Alan, there might be a new question for your questionnaire here.

for example ...

could operate using the existing file duosat, but had to use the IR Extender Slingbox plugged in Slingbox in IR port and let the front sensor to IR Twist and worked only in this way, and in another appliance is not necessary to use the extender IR Slingbox.

Correct was extracted Troy, because twist uses the same control they are physically identical in the case of spider are different physically ok I will Tantar again.

I can do better if you wanted to test I add as a guest in my Slingbox and allow free access so I could take the test, if this is ...

I tested again the existing file Duosat does not work as is possible questioned by the extracted file via WinLIRC convert to .bin?
thank you.

Sorry, wrong link. Just FYI, if you search for "duosat" in the file section, you will find it.

https://www.hifi-remote.com/forums/dload.php?action=file&file_id=12137

I will try again to load the file exists Duosat, and report the result ok.
thanks for the effort!

OK,
download ese file already ...