JP1 Remotes

i'm not sure. have one of tommy's ir widgets which received the signal. and once i got it straight between efc and obc, the signal worked to control the device...
yea sorry about using old software. it tells you how often i either get new gear or have to update a setup... next time, i will upgrade ...

thanks robman. i gave up trying upgrades before i got to that one and just got out the ir widget and you read the rest...
best,
jeff

well, i fixed it entered the 30, 31 and 156 as OBC not EFC and it works... rookie mistake.
best,
jeff

hi, i have a new yamaha audio sr-c20a sound bar i'm trying to construct a device upgrade, but i'm missing something.

1. Device:yahama audio sr-c20a sound bar
2. Type of device: audio
3. Year:2024
4. JP1/UEI Remote model: atlas 1056b01
5. Do you have a JP1 cable?yes
6. Still have original remote ...

thank you so much rob. i can confirm the bluetooth input function works in both upgrades. so i guess it really was the nec1-f16.

i'm about out of time today for this and haven't check out the memory usage. that will determine which way to go. in the test remote, the difference seems small on the ...

or another option is make someone walk over to the receiver and push the bluetooth input button lol.
i've done a number of captures and the decode is the same. this is the only button that is different. i'll leave it to you to decide what to do.

i'm actually surprised the old upgrade pretty much ...

hi rob,
i've run into an issue with one button, bluetooth input selection. irscrutinizer decodes it as: NEC1-f16: {D=210,S=30,F=80,E=14}
IRP:{37.9k,284,msb}<2,-2|2,-7|2,-16|2,-43m>(9022u,-16,A:63,B:3,(9022u,-7,2,-95m)18){A=0x8228aa000220a80,B=0x3}

i've uploaded the upgrade on working on to the ...

ok. i'm out of time today, but i think i figured out what i need to do.
rmir isn't the tool i need. i need to run rmdu.
then edit the functions, updating the names and the sub device and OBC with columns D and E respectively from my sheet (called S and F in IrScrutinizer). Also update the notes ...

Hi rob,
here's the link to the remote dump https://www.hifi-remote.com/forums/dload.php?action=file&file_id=27021 as an excel spreadsheet. i'm not sure how to make an upgrade from all the 'learns'. Is this still useful?

the arrow keys and the tone and volume showed 'beg' and 'end' in the ...

apologies robman and thanks for the reply!
this upgrade started a long time ago from a similar onkyo in the file section. maybe. it kept on working so i just kept using it, until now. it was probably this one: Onkyo TX-NR609 Receiver (remote RC-803M), https://www.hifi-remote.com/forums/dload.php ...

Hi, by my version of RM you know it's been a bit since i've been here. it's also been a long while since i used my irwidget. i need the 'streambox' input for a new onkyo 696. i used irScrutinizer to capture the key (NEC1: {D=210,S=109,F=12}, thanks barf.
The number keys for the existing upgrade ...

(sorry if this is an intrusive post) i've been using atlas remotes (1056B01) with the extender since my old one for all remote died (forgot the model number). these are $15-20, still available on ebay in either a backlit (my preference) or not. i have one in each room (4) and they all work the same ...

Thanks Jim!

Hi all, my supply of 1056B01's is running very low and i'm looking for a new remote to deploy throughout the house. my setups for the 1056B01 run (not quite the latest) extender. i use long/short keypress for changing modes/device selection on the device keys, shifting and DSMs. 5 devices is the max ...

Ah, I’ll do that. Now it makes sense to me that the script is looking at the extension to decide what ARG is set up.
I didn’t look/use your program too Much except to see that it ran. Personally I don’t mind the Mac mounted object model. It does make it explicit that it is more or less a self ...