JP1 Remotes

Yes it is a DIY Gadget cable. I have everything to assemble an ftdi cable so I guess I'll go that route.

Plugging in the cable: 00 00 00 00
Begin Comm: 00 02 51 53 00 00 00 00 00 00 20 02 00 (remote's buttons become unresponsive)
GetInfo: 00 02 50 52 00 10 02 D1 F1 4B 00
GetSigBlk (D500): 00 06 01 ...

This is a brand new remote from the cable company. I tried using RMIR but it says "remote not found". In IR when I try to download it says "jp12 read failed 0".

I have a RCRP05B that works in both IR and RMIR. Also the Atlas 1056B01 that I had worked in both IR and RMIR. I have remote master v2.02a ...

I sit at an angle from the tv about ten feet away. When I get closer to the tv it does work. Is there any way to make the atlas send a stronger signal? I assume not. I'd exchange it at the cable company but I'm afraid they'd replace it with an atlas 1056b03, or is it supported now?

Thank you for ...

I made a mistake, when I used learning earlier I accidentally used the cable device key.

Here is the learning capture using the tv device:
http://img5.imageshack.us/img5/7711/rm4sw.jpg

All of the obcs are correct comparing to the upgrade. Also the learned codes work correctly on the RCRP05B, but ...

Yes, the leds light up on camera in tv mode:
http://img542.imageshack.us/img542/1197/20130526021728379.jpg

And this is what I get when I learn a few commands from the atlas with the rca:
http://img11.imageshack.us/img11/1314/rm3fg.jpg

I've used the atlas to learn in the past and it has worked ...

That is correct, the RCRP05B has some functionality with the built in 1758 code. The atlas does not. Also the RCRP05B is able to control the tv and xbox with the device upgrades, the atlas does not.

http://img11.imageshack.us/img11/9141/remotec.jpg

I have the complete device upgrade for the ...

In tv mode the tv lights up as it should for the programmed functions, they just don't work.

I did the 981 reset and assigned the code 1758. The available buttons do not control the tv.


Edit: Also searching through the setup codes using setup 991, none of them turn the tv off. This tv was the ...

I started a new remote image and added only the tv, still does not function.

I did the 981 reset, downloaded to rm and added the devices. I'm still having the same problem with the tv and xbox. Also the vcr and dvd devices are still locked on vcr.

I'll try the 981 reset.

I changed the device to vcr in rm because it was stuck in the general tab. The other three devices allow you to change the type in ir and rmir. Changing them in rm through the device does not change it in the general tab for the dvd and vcr device.

RMIR file

Also, the vcr and dvd device keys are stuck on vcr in rmir and ir. I changed the devices on those keys to vcr. The samsung vcr/dvd combo works fine but the xbox media center does not. The op of the thread I linked had the same problem.

I tried replacing the remote rdf with this Atlas 1056B01 rdf according to this thread. But that didn't help.

I have an Atlas OCAP and a RCA RCRP05B. I was able to program five devices into the RCRP05B without any issue. When I do the same thing with the OCAP, two of the devices do not work at all.

I'm using RM 2.02a with the latest RFDs and Maps.

Devices not working: Vizio E500-A1 and Xbox Media Center ...

Upgrading to 2.02a fixed it, thank you.