JP1 Remotes

dks,
Have you asked the manufacturer about doing a Factory Reset on the TV?
Doing this usually resets lockout codes to something like 0000 or 1234 etc.
There might be a combination of buttons to press on the TV or remote to do this. The other way would be to get access to a "Service Mode" on the TV ...

Hi sweller,
I am new at this myself but it looks like you have some more reading to do to understand how this works.
The IR.exe program you downloaded is old, some of the links are not updated. IR.exe 8.00 is the latest I believe, although there is an 8.01 beta.
You also need either keymap-master v9 ...

Thanks for the response Capn.
I guess I was expecting that answer but thought I'd check to make sure.
John

I have an Atlas URC-1056 5-Device w/ backlight remote. Is there any way to increase the ON time of the backlight after a key is pressed? 5 seconds is a bit short to find the correct key for me.
I have read the readme file of the extender for this remote that deals with the backlight but I do not see ...

Hi all,
I have a European URC-8206 Kameleon remote. I am trying to set up an easy to use and see in the dark basic remote for my wife. This remote fits the bill in most ways. One thing I would like to do is to turn off the light for individual keys that are not used/programmed. The screens light up ...

Look at one of The Robman's postings. At the bottom are instructions with links to where you should post the file.

John

Great job Greg
Like the improved UI, nice and clean
Opens all the KM files that didn't work before.

Thanks,
John

Thanks for the answer. Just wanted to be sure.

John

After I upload an Upgrade file to the File Section am I supposed to post a link
to its location?
If yes in what forum do I post it or do people just have to stumble across the upgrade by searching?

John

Hi Doug,
I am new at this but here is some info I have on this subject.
I loaded the files you pointed to and had the same results.
Star_Choice.txt had all the Function names listed but no other info.
Star_Choice_DSR530_Addr0.txt only had "0" for Function name.
Star_Choice_DSR530_Addr1.txt was the ...

Vicky,
If you open this upgrade and then change to Emerson(3 device) and then restore the device to 42, you should be good to go, BUT the OBC's just seem odd 3=4,5=6,7=8,9=0,up=down

I got this upgrade to work only partially. Some of the keys worked but they were not what they were labeled. Odd as ...

Hi Vicky,
Yes I see what you mean about duplicates in the OBC.
I'll give the upgrade a try tomorrow but I doubt it will work correctly.

I did a learn from the OEM remote so I should be able to do an upgrade
from that. I had a few bad learns I have to do over.
Does this look more normal even though ...

Hi All,
I have downloaded this file Magnavox TB100MW9
from the file section. When it is loaded into Remote Master v1.95 it loads as a URC-8910(New) file with
a protocol of "Emerson (1-device)" "Protocol ID: 00 65.
If I try to change the remote to one of mine:

Atlas OCAP PVR 3033 JP1.3 (Black ...

Rob,
The RM file works fine and I converted it to my Atlas which also worked.
Glad to find out it wasn't me, I thought I was doing it the right way but after only a couple weeks doing this I was not positive.
I still haven't checked all the codes but all the ones I have checked work fine. It got hot ...

Rob,
Downloaded file and it works. Could only do a
quick check as I am going out the door as we
speak. Will test it further later.

Okay - what have I been doing wrong?
Every other file I have downloaded or
learned and made myself has worked.

John