RC5x
From JP1 Remotes
Revision as of 13:49, 29 September 2014 by The Robman (Talk | contribs)
RC5x
UEI protocol: 00F2 IRP notation: {36k,msb,889}<1,-1|-1,1>(1:1,~S:1:6,T:1,D:5,-4,S:6,F:6,^114m)+ EFC translation: NONE
The official (UEI) protocol executor for RC5x does not support EFC numbers. If you are creating an upgrade in KM or RM you should use OBC numbers, not EFC numbers. If you need the Hex Cmd for a KeyMove, you should use the functions sheet of KM or RM to compute it for you from the OBC and subdevice number.
In the functions sheet in KM you must put the subdevice number in the byte2 column, which KM calls "unit code".
What we call "Device" is really the "System". What we call Subdevice is really the "Command". What we call "OBC" is really the "Data". If you are using ProntoEdit to create the RC5 signals directly, that GUI uses that correct (System, Command and Data) Philips terminology.