983
From JP1 Remotes
Revision as of 03:00, 26 May 2016 by The Robman (Talk | contribs)
(983) Remote Signature Blink Back
- TAP the device, (TV, VCR, CABLE, etc.), button - RELEASE
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- TAP 9 - 8 - 3.
- TAP 1, carefully COUNT the number of blinks. (1st digit)
- TAP 2, carefully COUNT the number of blinks. (2nd digit)
- TAP 3, carefully COUNT the number of blinks. (3rd digit)
- TAP 4, carefully COUNT the number of blinks. (4th digit)
- TAP 5, carefully COUNT the number of blinks. (5th digit - JP1.4/JP2 remotes only)
If the remote DOES NOT blink it means the number is 0.
This is your signature code.
- JP1.3 remotes will have 4 digits starting with a 3
- JP1.4 remotes will have 5 digits starting with a 3
- JP2 remotes will have 5 digits starting with a 2