48-NEC: Difference between revisions
From JP1 Remotes Wiki
Jump to navigationJump to search
The Robman (talk | contribs) Created page with "===48-NEC=== If you get a decode whose protocol name is simply "48-NEC" that indicates the learned signal is not complete (usually caused by not holding the original remot..." |
The Robman (talk | contribs) m 1 revision imported |
(No difference)
| |
Latest revision as of 18:52, 2 November 2025
If you get a decode whose protocol name is simply "48-NEC" that indicates the learned signal is not complete (usually caused by not holding the original remote's button long enough during learning). Enough of the signal is present to accurately determining the device, subdevice and OBC numbers. But not enough is present to determine whether the protocol is 48-NEC1 or 48-NEC2.
