MENU  •   Set Up  •   Blinking Back the Code    
Punch Through  •   Clearing Out
     Macro-Sequence

How to Program your Cable Remote

(7000 Series)


Set Up

After getting the proper codes from the list below, use the following instructions to enter them into your remote.

  1. Press the device you want to program, then release.
  2. Press and hold the Magic button until the red LED flashes twice, then release.
  3. Enter your 3 digit code.
  4. You should receive 2 quick flashes after entering your code.

3 Digit Brand Codes

CABLE
TELEVISION
VCR

menu

Blinking Back the Code:

  1. Tap the device Key - Release
  2. Hold "Magic" until it blinks twice - release.
  3. Press 9 - 9 - 0.
  4. Press 1, Count the number of blinks. (1st digit)
  5. Press 2, Count the number of blinks. (2nd digit)
  6. Press 3, Count the number of blinks. (3rd digit)
If the remote DOES NOT blink it means the number is 0.

menu

Redefining a Key

  1. Hold "Magic" Until it blinks twice.
  2. press 9 - 9 - 2.
  3. press the DEVICE key you want moved
  4. press the DEVICE key you want to replace.
Example: If you want the Aux key to be a TV key:
"MAGIC" (2 blinks) 9 - 9 - 2, TV (you want to move TV)
Then AUX (you want to replace AUX).

menu

Punch Through

This sets Volume to work for one device in all modes.
For example, the TV volume will work in the cable and VCR modes.
  1. Hold "MAGIC" until it blinks twice - release.
  2. Press 9 - 9 - 3.
  3. Press the device key from which you would like the volume controlled.
You will get two blinks on the remote.


menu

Macro-Sequence

This will allow you do do several functions with just the touch of ONE key.
  1. Press the Device key - release
  2. Press "magic" and wait for two blinks - release
  3. Press 9 - 9 - 5
  4. Press the key you want the Macro to be on
  5. Press the sequence of keys you want the remote to do
  6. Press "Magic" and wait for two blinks - release.
      When you hit the key you put the macro on it will automatically start the sequence. IMPORTANT: The Macro key will be the macro in ALL MODES so it is best to pick a key you will not need for anything else in any other mode.

      menu


All Material Copyright ® Universal Electronics Inc.
Any questions about the products should be directed to cablehelp@ueic.com