15-2136, 4-in-One Kameleon Remote Control

15-2136, 4-in-One Kameleon Remote Control

Device Types
Device Key to Use	Device Type
TV	TVs
VCR	VCR, TV/VCR Combo, or PVR (DVR)
CBL/SAT	Cable Box (Converter), Satellite Receiver, or Satellite/PVR Combo
DVD	DVD Player, TV/DVD Player Combo, DVD/VCR Player Combo, or Home-Theater-in-a-Box (HTiB) Device

Setting Up Your Remote Control

Refer to "Manufacturers' Codes" above and
Turn on a desired device (e.g., VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).
Press and hold P until the bottom IR segment flashes twice.
NOTE: If the display turns off because of inactivity, you will need to start the programming sequence again by repeating this step.
NOTE: To stop programming at any time, press once to return to the program keys screen. Press once more to exit completely.
Press above DEV. SET. once. The Device Setup programming screen will appear.
Press a device key once (i.e., VCR, TV, CBL/SAT,or DVD). The selected device key will animate.
Use the Manufacturer's Codes to locate the type of device and brand name and then use the number keys to enter the first four-digit code for your device. If performed correctly, the bottom IR segment will flash twice.
NOTE: If the bottom IR segment displays one long flash instead, a mistake has occurred. Try entering the same code again.
Aim the remote at the device and press POWER once. The device should turn off. If it does not, repeat steps 5 and 6, trying each code for your brand until you find one that works. If it still doesn't work, try other codes.
If the code works, press OK once. The bottom IR segment flashes twice. If desired, repeat steps 4 through 7 for each device you want to control.
When finished, press the "home" key twice to exit programming and return to the last-selected device menu screen.
Repeat Steps 3-7 to program other devices.