2-IN-1 Universal Remote Control
(15-1989)                 Manufacturer Codes         Faxback Doc. # 64466

Setting Up Your Remote Control

1.  Refer to "Manufacturers' Codes" on Faxback Doc. # 64467 and write down
    the codes for your original remote controls on the provided label.

2.  Press the device key for the type of remote you are replacing (TV, VCR,
    or CBL).

3.  Hold down P until the red indicator blinks twice, then release P and
    enter the four digit code.

When the indicator blinks twice again, point the 2 in 1 at your device
    and press PWR.  The device should turn on (or off, if it was on).

(RS 03/13/2001)