6-in-One Smart Audio/Video Remote Control
(15-1994) Features Faxback Doc. # 58318
Introduction
Your RadioShack 6-in-One Smart Audio/Video (A/V) Remote control is both
pre-programmed with the most commonly used commands, and equipped with
"smart technology" that lets you customize your remote to meet your home
entertainment needs.
Your 6-in-One can replace up to six infrared remote controls. Use it to
control your TV, VCR, cable converter, satellite receiver, CD player,
tuner, phonograph, video accessory, digital audio tape, cassette or laser
disc player from up to about 26 feet (8 meters) away. It also has these
features:
Four Smart Keys - can learn up to 24 features from your original
remotes (one for each key in up to six device
modes), so you can use the 6-in-One to perform
functions that were not part of its original
programming.
Lighted Keypad - lets you easily see the remote's buttons in a dark
room. With this feature on, pressing any button
lights the entire keypad.
Favorite Channel Scan - lets you program your remote to automatically scan
through 10 of your favorite channels on a TV, VCR,
or cable converter.
Sleep Timer - lets you set a device with or without a built-in
sleep timer to operate for 15 minute intervals (up
to 60 minutes), then automatically turn off.
This manual includes a list of manufacturers' 4-digit codes for your
devices. (If your brand is not listed, see "Searching for a Code" in
Faxback Doc. # 58322.) After you enter the codes for your original
remotes, the 6-in-One Smart A/V Remote is ready to operate the original
remotes' most used functions.
A Look At Your Remote
Your RadioShack 6-in-One Smart A/V Remote Control was designed with the
functions used most often to operate your TV, VCR, cable converter, CD
player, satellite receiver and audio equipment.
Key Function
P .......................... Used in setting up your devices.
(light bulb symbol) ........ Used to activate light mode.
POWER, MENU, GUIDE, SELECT, Operate the same as the corresponding keys on
SELECT, MUTE, LAST, VOL +, your original remote control.
VOL -, DISPLAY, CH +, CH-,
digit keys, TV/VIDEO, ENTER
AUX 1, AUX 2, VCR, TV, CD, Used when you set up the remote control to
CBL/SAT replace your original remote controls. Also
used during normal operation to tell the
remote control which device you want to
control.
All Lights On (POWER), PLUG Allows you to control lamps and appliances
'N POWER, All OFF (MUTE), with your 6-in-One A/V Remote Control. To get
Brt (VOL +), Dim (VOL -), the full benefit from this feature, you must
On (CH +), Off (CH -) purchase additional equipment, available at
your local RadioShack store.
SLEEP ...................... Controls the Sleep Timer in TV, CABLE, SAT,
and AUX 1 or AUX 2 modes for devices that
have this feature. If your device does not
have a sleep timer, SLEEP activates the
remote's built-in sleep timer.
REW, PLAY, FFWD, REC, STOP, Controls VCR functions and are used to select
PAUSE options and navigate in your TV or cable
converter.
1s, 2s, 3s, 4s ............. Smart keys used for learning from your
original remote control.
FAV/SCAN ................... Can be programmed to scan through your 10
favorite channels or left unprogrammed to
scan all channels.
PIP, SWAP, MOVE ............ Picture-in-Picture keys operate the same as
corresponding keys on your original remote
control.
SURR, CENTER, /\, \/, <, > Controls your surround Sound system and other
similar devices.
EXIT ....................... Exits the menu screen in TV, VCR, Cable/SAT.
modes.
Notes: Whenever you use REC on the remote control, you must press it
twice. This safety feature helps you avoid accidentally recording
over tapes.
If you use the 6-in-One to replace extremely complex remote
controls, the 6-in-One might not be able to duplicate some of the
original remote control's functions, but you can program one of
the Smart Keys" to operate those functions. See "Using the Smart
Keys" in Faxback, Doc. # 58320.
(BR EB 1/20/00)