popov
Joined: 23 Jun 2008 Posts: 1
|
Posted: Mon Jun 23, 2008 3:30 am Post subject: Panasonic 42PZ800 |
|
|
Hi!
I read a lot during the weekend and I found some interesting things about my question, but I didn't read that someone solved the problem.
I have a Panasonic Plasma as mentioned above and a dreambox V2 remote control. Every tv function on the dreambox RC is working fine, except the power on macro. The problem is the power on button should be pressed for 1-1.5 seconds. I tryed everything I found in the board but it doesn't work. For example, to press the button in the micro many times, this with combined device protocol an so on. The combined device protocol is not present for these kind of remote controls, may be as I understand it, because their protocols are with two bytes. Is it possible to make it somehow with this pause protocol, where the pause between the two presses is set to 0? That is only an idea. I am realy new here.
Did anyone succeed to manage this Panasonic problem?
I would be very grateful.
Thx |
|