View previous topic :: View next topic |
Author |
Message |
jbollt
Joined: 14 Dec 2003 Posts: 53
|
Posted: Wed Jan 07, 2004 4:46 pm Post subject: Scientific Atlanta? |
|
|
My neighbor has a Cable Co provided remote, (Scientific Atlanta Explorer 3 according to IR) and it has the 6 pin connector. We have been able to download the info from the remote to the IR program, but there doesn't seem to be a matching remote type in KM. Any help? Thanks |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Wed Jan 07, 2004 5:33 pm Post subject: |
|
|
are there any identifying marks on the remote, especially in the battery compartment?
can you take a picture of the remote and post it? |
|
Back to top |
|
|
jbollt
Joined: 14 Dec 2003 Posts: 53
|
Posted: Wed Jan 07, 2004 5:36 pm Post subject: |
|
|
The battery compartment lid says "model #E2050ER1" Model name explorer, SA part # 590272 |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Wed Jan 07, 2004 6:30 pm Post subject: |
|
|
You could try the "SA40 (Sc Explorer).rdf" RDF file to load to it and see if it works. It's signature will cause an error message when you try to install it but say it is OK and I promise it will not hurt the remote. I just may not work until it is reset if the RDF is not close enough. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Wed Jan 07, 2004 6:39 pm Post subject: |
|
|
Nils,
If he downloads the remote and posts the raw code somewhere, can an RDF be created for him? Is that how the process works?
-Steve
If that is how the proccess works and I wanted to help, where do I go to read about how to convert the raw data to an RDF? or is this just something you get with years of experience? Thank You in advance! |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Wed Jan 07, 2004 8:01 pm Post subject: |
|
|
usblipitor wrote: | Nils,
If he downloads the remote and posts the raw code somewhere, can an RDF be created for him? Is that how the process works?
-Steve
If that is how the proccess works and I wanted to help, where do I go to read about how to convert the raw data to an RDF? or is this just something you get with years of experience? Thank You in advance! |
Steve, you are correct that an RDF can be created from the download. The best way to get the knowledge is by searching this forum and the jp1 forum on the topic. There is a bunch of discussions on this that can get you started. Also helps to review the RDF specs that come with IR. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
jbollt
Joined: 14 Dec 2003 Posts: 53
|
Posted: Thu Jan 08, 2004 2:19 pm Post subject: |
|
|
I have posted the raw data as "scientific Atlanta.txt" in the diag area. Any help will be appreciated. Or...are we wasting time. Can this remote even do any other devices, such as a Sony Sourround system and DVD player? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu Jan 08, 2004 2:33 pm Post subject: |
|
|
Scientific Atlanta.txt
When I opened this file, IR.exe automatically used the "ER10 (Sc Explorer 3).rdf" RDF, what problems did you have when you downloaded it? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Thu Jan 08, 2004 2:37 pm; edited 1 time in total |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Thu Jan 08, 2004 2:35 pm Post subject: |
|
|
The errors of my way in reading your post wrong was pointed out to me. I thought IR did not recognize it. I see now that IR does recognize the remote but there is no support for the Scientific Atlanta 3 remote in KM. I checked and that looks right. I also checked and RM does support it so that leaves you with two options. One is to see if Mark can add support to KM (unless I missed it there) or download and install RM which is in the required tools section of jp1 (link below my name) _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
TimH
Joined: 26 Dec 2003 Posts: 60 Location: Panama City, FL, USA |
Posted: Fri Jan 09, 2004 8:51 am Post subject: |
|
|
I also have a couple SA Exp3 remotes. This is a sweet remote from the standpoint of something that feels good in your hand and is laid out well. I'd love to be able to get some additional functionality out of it.
I have taken some pics that I could submit for inclusion in RM. Currently RM uses the "Generic Remote" pic. Who should I send them to? I looked on SourceForge and didn't see any provision for submitting to the project. |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Fri Jan 09, 2004 9:23 am Post subject: |
|
|
TimH wrote: | I also have a couple SA Exp3 remotes. This is a sweet remote from the standpoint of something that feels good in your hand and is laid out well. I'd love to be able to get some additional functionality out of it.
I have taken some pics that I could submit for inclusion in RM. Currently RM uses the "Generic Remote" pic. Who should I send them to? I looked on SourceForge and didn't see any provision for submitting to the project. | You can e-mail them to me. The reason I still use the generic is because I could not find a good picture. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
mr_d_p_gumby Expert
Joined: 03 Aug 2003 Posts: 1370 Location: Newbury Park, CA |
Posted: Fri Jan 09, 2004 12:20 pm Post subject: |
|
|
jbollt wrote: | I have posted the raw data as "scientific Atlanta.txt" in the diag area. |
TimH wrote: | I also have a couple SA Exp3 remotes. | The existing RDF indicates that this remote uses a 6805 processor. If that is true, we'll need to determine which of two types is used before proper support can be added to KM or RM.
One quick way to determine the type is to examine a protocol upgrade in the IR file. I looked at jbollt's file, but there are no protocols in it. TimH, do either of yours have any upgrades in them? _________________ Mike England |
|
Back to top |
|
|
TimH
Joined: 26 Dec 2003 Posts: 60 Location: Panama City, FL, USA |
Posted: Fri Jan 09, 2004 2:07 pm Post subject: |
|
|
Neither of mine currently have any upgrades installed. I just used IR to save the config. I will do whatever you'd need to get the info. Just let me know. |
|
Back to top |
|
|
TimH
Joined: 26 Dec 2003 Posts: 60 Location: Panama City, FL, USA |
Posted: Fri Jan 09, 2004 2:08 pm Post subject: |
|
|
Would it help to have pics of the board? |
|
Back to top |
|
|
mr_d_p_gumby Expert
Joined: 03 Aug 2003 Posts: 1370 Location: Newbury Park, CA |
Posted: Fri Jan 09, 2004 4:00 pm Post subject: |
|
|
TimH wrote: | Would it help to have pics of the board? | It might, though it's not always possible to tell just by looking. Give it a shot & let's see if it tells us anything. _________________ Mike England |
|
Back to top |
|
|
|