JP1 Remotes

[astra]

Hi All,

Was wondering if anyone knew how to convert WinLIRC generated raw codes to Pronto Discrete to use on the Psiloc website to gain an .ir file to run on my nokia N95.

I have built myself a simple serial infrared receiver as posted on the web and use it with winlirc to gain the signal codes of my remotes which i cannot find in their data base.

When inserting these codes on psiloc website as it says that its not in pronto discrete format. I would be appreciative if someone could point me in the right direction as to how to convert or if there is a programme or converter that I may use to do it.

please note I am not a programmer or have any knowledge of codes

The generated output file written by Winlirc looks like this - I used my Omni DVD remote.

#
# contributed by
#
# brand: Omni
# model:
# supported devices:
#

begin remote

name omni
flags RAW_CODES
eps 80
aeps 100

ptrail 1997
repeat 9336 1983
gap 38426


begin raw_codes

name power
9103 1985 2000 1996 1993 1998
1992 2000 1996 2009 1993 1992
2005 1989 2004 1998 1992 2003
1993 1999 1996 2002 1997 1997
1998 2000 1997 1997 1999 2004
1992

name enter
9211 1989 2005 1984 2009 1991
2005 1987 2004 1999 2010 1987
1988 2004 1995 2000 2003 1991
1996 1997 1997 1996 1999 2005
1992 1993 2000 2000 1994 1998
1994

name play
8972 1987 2001 1993 2004 1993
1993 2001 1997 1996 1996 2008
2054 1942 1999 1993 1994 2001
1995 2001 1990 2003 2003 1990
1998 1996 1998 1997 1999 2010
1985

name stop
9212 1998 2007 1978 2006 1992
1997 1998 2001 1992 1996 2003
1995 2001 1997 1996 2000 1992
2001 1996 2000 1996 2000 1996
2001 1993 1997 2006 1989 2005
1994

name pause
9572 1999 1994 1995 1996 1998
1998 1997 1998 2004 1999 1996
1990 2002 1995 1995 2004 1993
2000 1995 2005 2004 1985 2003
1994 2001 1996 1997 1999 1997
2001

name mute
9473 1998 1989 1998 1998 1998
1992 2007 2040 1952 1995 2000
1994 2006 1996 1992 2001 1995
1998 1999 1997 1993 2000 1999
1996 2000 1994 2000 1995 1998
1998

name forward
9349 1995 1996 1995 1993 2004
1997 1989 2002 2002 2000 1993
1997 1999 1995 1995 2002 1997
1999 1996 2004 1988 2001 1994
1997 2002 1997 1998 1994 2034
1969

name back chapter
9086 1997 1993 2000 1993 2009
1983 2004 1995 2000 1996 2001
1994 1999 2002 1991 2006 1996
1996 1997 2000 1993 2008 1991
2000 2011 1987 1993 1998 1995
1999

name forward chapter
9099 2111 1996 1998 1996 2008
1986 2001 1994 2012 1989 1996
1997 1994 2006 1991 2005 1991
2000 1995 2005 1992 1997 2001
1998 1999 1997 2001 1996 1998
2001

name rewind
9479 2241 1995 2002 1989 1999
2031 1968 1994 1997 1998 1999
1997 1997 2008 1983 2008 1989
2007 1988 2014 1982 1999 2001
1996 1998 2000 1996 1995 2001
1999

name setup
9596 2243 1992 1997 2002 1996
1996 1997 2000 1999 1998 1997
1999 1994 2002 1992 2000 1999
1993 2001 1999 1996 1995 2004
1994 1997 1995 2009 1989 1998
1996

name left
9354 2236 1995 1995 2004 1990
1995 2000 1997 2001 1996 1998
1999 2012 1985 1993 2002 1994
2000 1999 2002 1990 2002 2004
1990 1997 1998 2002 1992 1999
2001

name right
9093 2002 1986 2006 1999 1990
2003 1990 2007 1989 2004 1992
2005 1992 2002 1994 2001 1992
2000 2002 1997 1996 1999 2001
1995 1999 1993 2006 1989 2001
1998

name up
9100 1995 1992 2001 1993 2005
1987 1999 1994 2002 1996 2008
1989 1996 1999 1996 1998 2000
1991 2010 1991 2007 1990 2000
1994 2003 1996 2001 1992 2001
1994

name down
9473 2002 1986 1995 2000 1997
1997 1997 1998 2001 1992 2013
1990 1987 2008 1984 2000 1994
2003 1996 2001 2003 2000 1988
2005 1989 1998 1997 1999 2003
1993

name menu
9220 1986 1999 1993 1999 1995
2006 1989 1996 2007 1989 2003
1991 1997 1999 1996 2004 1991
2002 1993 2008 1988 2000 2001
1996 1998 1999 1995 1999 1997
1998

name 1
8975 1988 1992 2040 1959 2004
1991 1990 2003 1996 2001 1997
2002 1994 1994 2003 1992 2002
2001 1994 1997 2003 1993 2001
1995 1998 2004 1991 2004 1994
2005

name 2
9607 2103 1998 1998 2001 1993
1994 1994 2002 2004 1995 1992
1997 1999 2004 1994 1996 1999
1995 2000 1993 2001 1998 1996
2000 1994 2000 1994 2003 1991
2000

name 3
9350 1991 1995 1992 2003 1997
1997 2000 1999 1992 2006 1993
1996 1999 1993 2003 1995 1998
2000 2000 1996 1996 1997 1997
1999 1997 1998 1996 2008 1992
1995

name 5
9469 1990 1997 2004 1990 1996
2002 1996 1993 2003 1993 2002
1991 2002 1995 2006 1993 1999
1996 1997 1996 1999 1998 1998
1994 1999 2001 1994 2002 1995
2000

name 6
9476 2013 2017 1961 1991 1997
2001 1999 1992 2000 1999 2007
1990 1995 1997 2008 1988 2010
1988 1999 1999 1995 1994 2003
1993 1999 2001 1998 1997 1999
1995

name 8
9218 1995 1991 1994 2008 1990
2002 1993 2000 1998 1999 1993
2003 1993 1997 2001 1992 2003
1993 2002 1994 2003 1995 2003
1994 2000 1994 2006 1994 2002
1994

name 8
9224 1990 1991 2006 1983 2006
1994 1997 1996 2019 1981 1991
2005 2016 1977 1994 2016 1982
1997 2000 1993 2003 1995 2001
1994 1999 1997 1997 1999 1995
2008

name 9
9096 1996 1987 2004 1999 1999
1992 2001 1996 1995 1996 1998
1998 1993 2000 1997 2000 1996
2000 1998 2001 2007 1992 1993
2000 1998 1998 1995 2002 1997
1996

name 0
9219 1994 1995 1997 1996 1996
1995 2012 1982 2001 1998 1996
1997 1998 1999 1995 1998 1995
2013 1983 2000 1998 1995 1997
1998 2002 1999 1995 1994 2003
1996

end raw_codes

end remote

[johnsfine]

[astra]

Thanking you for your reply & input johnsfine

I acknowledge your expertise in this areas and understand that the data I posted may not have been meaningful or useful in any way.

I have WinLIRC installed on 2 computers, one running xp and the other vista and am getting the same result. perhaps it is my hardware. The ir receiver I am using is the TSOP 1738 and the receiver I have built is a replica of the one posted on this site http://lnx.manoweb.com/lirc/?partType=section&partName=insideBox (sorry if I am not allowed to post links) When using WinLIRC and selecting read raw data it gives a response telling me that the receiver is recieving and working correctly, and as per site to start learning mode, but who knows?

I have looked at CaptureIr and have it installed on my computer, upon reading help files I notice that I would have to change my setup of my receiver from the serial com port to a printer port connection.

I think I will make the relevant changes to my setup and see how my luck goes with CaptureIr. May I ask when using the program (captureIr), what format does it write the resulting code? could this data be used to convert to pronto Discrete format? Is it .ccf? or some other hex format? what program would I use to convert it to Pronto Discrete code that is compatible with the Psiloc site?

The model Omni I have is a DV3300FA, I also have a TEAC TV CT-M807SV not listed anywhere. I will try using CaptureIr before trying to convert JP1 file, seems a little over my head to convert manually.

[kupakai]

[johnsfine]

[johnsfine]

[csk007]

just for the sake of additional info
psiloc accepts this code i found on google

0000 0048 0001 0011 0017 0163 0017 0061 0017 00a3 0017 00a3 0017 0061 0017 0061 0017 0061 0017 00a3 0017 00a3 0017 00a3 0017 00a3 0017 00a3 0017 00a3 0017 00a3 0017 00a3 0017 00a3 0017 00a3 0017 0163

put this code in the composing windowof psiloc select button and press append it accepts it

try appending 0000 to make a total of 40 values (4hexdigits each)

[csk007]

and the matter of converting winlirc generated .cf files into .ir format is very easy
follow the instructions given on psiloc website >>upload wizard

it recognises the .cf after upload
rearrange the buttons in a proper order
thats all now either download the generated .ir file from their website to install on phone manually or use gprs on phone and refresh the lists to get the device u uploaded

[jumpjack]

[johnsfine]

[jumpjack]