JP1 Remotes

Hello, this is my first post here. Im looking for a code for an emprex
HD-2001-F tv to change the input, i have all other functions up and running but no input or source change function. Is there a built in code that may work on the uei 1056B01-L (urc remote)

Hi, your post is what we call a code search post. If you look at the code search forum, you'll see we have a template for you to fill out, to expediate this kind of thing.

The answer is we might have an Emprex input code, but we need information from you.

But it looks like your Atlas 1056 is a learning remote, so you should just be able to learn the code from your origninal remote.

The learning procedure is shown here.

Thanks for your fast response, the problem is i do not have the original remote I obtained the codes i have now by learning from a direct tv rc64 remote which supports emprex but it doesnt have the source/imput change button support either. Ill do the code search like you suggested..thanks again!!

The input key on the white directv remotes has to prorammed in for it to work:


1. tv
2. press and hold MUTE & SELECT for two blinks
3. enter 9 6 0

Thanks for your response, i tried the code like you say and the input key is still not functioning for the emprex tv. Is the 960 specific to the emprex or a code to activate the tv input feature, is there something i need to do afterwards? Thanks again

Wow this is a tricky one. Still havent got this going yet any other suggestions.