JP1 Remotes

[ATTLA]

Hi all... I just purchased the URC-9910 as my first URC! I'm excited and at the same time a little overwhelmed.


Any suggestions as to where my Cablevision SA 8300HD A B and C buttons should be assigned?

I'm thinking L1 thru L3 but I'm not sure for what else I'd need those buttons.

Thanks for your experience!
_________________
Another thing to learn about... remotes

[Capn Trips]

Your choice. I would use M1 through M3, but L1 through L3 are equally fine.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)

[floyd1977]

I agree with Capn. When I programmed an 8910 for my father-in-law, I put his cable remote's A,B,C buttons on M1,M2,M3. His cable box happened to be a SA 8300.

What I really don't like about that cable remote is that the page up/down buttons are on separate keys, rather than on the channel up/down buttons. I ended up making a long key press of channel up/down do a page up/down, but I don't know if that's the best solution.