A veteran Newbee question?

This is the JP1 beginners forum. There's no such thing as a stupid question in here, so post away, but this forum is just for JP1 users and people considering JP1, non-JP1 users please use the appropriate forum above!

Moderator: Moderators

Post Reply
schmidlapp
Posts: 12
Joined: Thu Oct 16, 2003 12:27 pm
Location: Western NY

A veteran Newbee question?

Post by schmidlapp »

I am not new to this because I have been sucessfully using IR and KM/RM to program my remote for 4 years. But recently I got a new TV so I decided to download the latest and greatest IR and RM programs and start from scratch. The problem is when I load up IR and check the interface a box comes up and says "Failed to open JP1.x interface." The RDF's are recoginized but it won't allow me to download my current codes from my remote which is where I want to start my upgrade. The IR program worked fine the other day before I decided to try the newest version. Any help would be greatly appreciated.
Top
vickyg2003
Site Admin
Posts: 7109
Joined: Sat Mar 20, 2004 12:19 pm
Location: Florida
Contact:
Contact vickyg2003

Post by vickyg2003 »

Are you really trying to do a JP1.x? That's a realatively new type of support. If you have been doing this a long time, chances are you want to select JP1.

In IR Select interface off the menu and select the appropriate cable.
Top
schmidlapp
Posts: 12
Joined: Thu Oct 16, 2003 12:27 pm
Location: Western NY

Post by schmidlapp »

Thank You. This is new with this version of IR. I think I'll have another beer and try it again. Once again. Thanks!
Top
Post Reply

Return to “JP1 - Beginners”