JP1 Remotes

I have learned the commands from an existing remote for a LifestyleFirst fan. The IR file is available here https://www.hifi-remote.com/forums/dload ... le_id=5287

No protocol information is shown in IR so I suspect its an unknown protocol. I'm not sure how to go about building a new protocol for this (if in fact that's what is needed). I'll try researching posts on how to do this but would appreciate any help with the learned signals.

There are five commands

Off
On/Speed
Timer
Breeze
Louvre

Thanks

These signals match the Lasko signals here.

AUX:1 = D8 04
AUX:2 = D8 08
AUX:3 = D8 20
AUX:4 = D8 10
AUX:5 = D8 40

Thanks very much. I will give that a try and confirm.