JP1 Remotes

Posted: **Wed Nov 14, 2007 8:24 pm**

I have a CoolerMaster 282 case. It comes with the new iMON inside LCD (not vfd)

apparently they have changed the remote again. I tried both the UEC and Robman's upgrades (Rob's was missing up and down arrows?) and neither worked well.

What can i do to help decode the remote to get the signals ?
I have been learning them, here is an example

the "play" button is
(from ir.exe on the learned tab)

Frequency 38461 Round to (blank) Bi-Phase No

Sent Once
+1306 -1204 +470 -1204 +470 -1204 +470 -1204 +4650 -1206 +2142 -1204 +470 -1204 +470 -2040 +470 -2040 +470 -39194 +1306 -1204 +470 -1204 +470 -1204 +470 -1204 +4650 -1206 +470 -1204 +470 -1204 +470 -1204 +470 -2040 +470 -2040 +470 -130600

-Jeff

Posted: **Wed Nov 14, 2007 9:45 pm**

Upload your IR file with as many learned signals as you can fit (appropriately annotated with notes) to the diagnosis area and provide a link to it here.

Posted: **Thu Nov 15, 2007 8:18 am**

http://www.hifi-remote.com/forums/dload ... le_id=5162

will post in the decoding help section

JP1 Remotes

Need help with new iMON PAD (iMON inside) upgrade

Need help with new iMON PAD (iMON inside) upgrade

link to uploaded learned ir