JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Discrete input codes for Philips TV - 32PW9527

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
JezzaT



Joined: 13 Aug 2007
Posts: 2

                    
PostPosted: Fri Sep 21, 2007 8:03 am    Post subject: Discrete input codes for Philips TV - 32PW9527 Reply with quote

1. Device: Philips 32PW9527
2. Type of device: TV
3. Year: 2003
4. JP1/UEI Remote model: URC-7562 B00
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes, TV0054, TV0690, TV0556
10. Learning remote question? n/a. No Button on Original Remote.

I'm looking for discrete video input codes AV 1-4 and side

I used this upgrade -TV1054
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=953
The discrete power works fine but the discrete inputs do nothing, EFC-178 does brings up a list off all the inputs though.
I can simulate with macro's but its pretty slow

I found pronto files for this tv but neither of them had discretes

Some else has also looked for them:
http://www.remotecentral.com/cgi-bin/mboard/rc-discrete/thread.cgi?keywords=1500&highlight=9527

any clues or am I out of luck?
Thanks Jeremy
Back to top
View user's profile Send private message Yahoo Messenger
irs009



Joined: 14 May 2006
Posts: 99

                    
PostPosted: Wed Sep 26, 2007 8:36 am    Post subject: Reply with quote

Try these in the order listed. They work on my 1 year old Philips TV.
56
130
210
194
226
138
253
29
188
Good luck, Jack
Back to top
View user's profile Send private message
JezzaT



Joined: 13 Aug 2007
Posts: 2

                    
PostPosted: Thu Sep 27, 2007 6:05 am    Post subject: Reply with quote

Great - I had partial success - code 226 gave me AV1.
That code is set to AV4 in 1054 upgrade I use so I should of found it myself.

130 and 194 gave me the AV menu, the rest did nothing.

226 did not turn the TV on alas - is that everyone else's experience with Philips discrete input codes?

Thanks for that
Jeremy
_________________
Jeremy D Thomas
Back to top
View user's profile Send private message Yahoo Messenger
irs009



Joined: 14 May 2006
Posts: 99

                    
PostPosted: Thu Sep 27, 2007 9:59 am    Post subject: Reply with quote

Jeremy, I've been looking at your TV, and notice it has a feature called 'Pixel Plus' (which I don't understand). If I am watching digital TV on my Philips HDTV, I can't switch inputs. I use macros to change the set to analog mode then select the input.

Don't know if that will help you, but it's all I've got.

Did you put a 0 in front of the 2 digit codes? I should have done that...Jack
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control