RID file for Conaxsat Trio (and Duo)

[rager1969]

I almost bought a Conaxsat, so I built a RID for it based on The Robman's upgrade file discussed in a different forum http://www.hifi-remote.com/forums/viewt ... c&&start=0.

However, since I ended up buying a Pansat 250SM, I have no way of verifying the RID file works. Nonetheless, I have posted it http://www.hifi-remote.com/forums/dload ... le_id=4971.

If you are able to test it, reply back here to let us know.

[The Robman]

thanks dude

[usctrojan1]

the upgrade rid file didnt work for me nor for jimmy74720
from http://www.avsforum.com/avs-vb/printthr ... 30&page=11
.

I'm trying to test the upgrade file to my jp1 remote first before i figure out how to convert it to a rid.

in the meantime can someone try to make a rid too?

[usctrojan1]

I upload the upgraded file provided and have verified it work. So now my question is how to convert in to a rid file? any help?

[jimmy74720]

usctrojan1

I just learned how to make a rid file but I need the remote code to start with.

[jimmy74720]

If anyone can help please do so. I have two replays and would be set if I could just get them to change channels on my Conaxsat Duo. I have used the Rid that Rager provided with no luck. I have also made my own Rid with the software and Files I found on this forum, but still no luck.
One thing I have noticed is, before I uploaded anything on my replay, I was able to turn the conaxsat on and off with a few of the preset rid Numbers (0255 0333 and 05??) but now that no longer works.
However I can still change channels on my DTV receiver.

[usctrojan1]

still no luck. ive done 12 different variation with rid creation.
the ir codes have are working however the RID is not.
maybe i'm doing it wrong. heres a screen shot

http://www.geocities.com/shadowman114/2000.jpg

[jimmy74720]

still no luck. ive done 12 different variation with rid creation.
the ir codes have are working however the RID is not.
maybe i'm doing it wrong. heres a screen shot

I found if you change the device to 0 it will repeat the last command you entered on the CNX if you enter a 4 on the CNX it will repeat the # 4 three times and change to that channel. I have been trying different codes but it is like finding a needle in a haystack.

[jimmy74720]

http://home.fuse.net/jimmy/FTA/ridS2000fiscreen.jpg

[usctrojan1]

success> use the pronto ir learns rather than the uei/rm upgrade file to create the RID.

[jimmy74720]

success> use the pronto ir learns rather than the uei/rm upgrade file to create the RID.

Great

Where can I get the IR Learns file?

Or the rid file?

[Toonces]

Working RID file posted today. http://www.hifi-remote.com/forums/dload ... le_id=5109

I built this using the hint from usctrojan1 above. After being unsuccessful with converting a working slingbox code file I started looking for pronto codes and lo and behold, the Robman comes through for someone building a file for a tivo! Not quite a ReplayTV but he listed all of the Pronto Hex codes which RidGen will happily convert. I don't know why the codes would be different than the ones generated by using EFC codes from a working slingbox file but they are and they work. No double numbers, just ReplayTV working as it should!

For those interested, the original thread with conaxsat Pronto codes and some other technical words and stuff is here: http://www.hifi-remote.com/forums/viewt ... 4329ff49e5

Thanks again for the awesome resource The Robman!

Toonces