I have tried all the device codes listed for Aiwa and attempted using the two upgrades I was able to find, but so far, nothing will work fully.
This is an all-in-one system with a CD changer, tape deck, tuner, and a couple of aux inputs.
The device upgrades that I tried will power on the system and change a few of the settings, but neither of them will control the volume.
Does anyone have a working setup with this device? I can attempt to learn keys and make my own upgrade, but I thought I'd see if anyone had any other ideas first.
ofa8811 and AIWA CX-NMT70
Moderator: Moderators
-
Mark Pierson
- Expert
- Posts: 3017
- Joined: Sun Aug 03, 2003 12:13 am
- Location: Connecticut, USA
- Contact:
Re: ofa8811 and AIWA CX-NMT70
If one of the available files doesn't work for you, then your only option is to learn from the OEM remote and create your own upgrade. It sounds like you can use an existing file as a starting point.bowieb wrote:Does anyone have a working setup with this device? I can attempt to learn keys and make my own upgrade, but I thought I'd see if anyone had any other ideas first.
Mark