JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Sharp - discrete Codes

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
HkyFrk



Joined: 27 Dec 2003
Posts: 32

PostPosted: Wed Dec 31, 2003 9:53 am    Post subject: Sharp - discrete Codes Reply with quote

Does anyone know of any discrete codes for a Sharp TV (app. 4 years old).
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18307
Location: Chicago, IL

PostPosted: Wed Dec 31, 2003 10:05 am    Post subject: Reply with quote

You might want to include some additional information, if you don't want people to just ignore this post. For starters, if you are using a standard UEI setup code, please state what it is. If you have created your own upgrade for it, please state the protocol and device code(s) used.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
HkyFrk



Joined: 27 Dec 2003
Posts: 32

PostPosted: Wed Dec 31, 2003 10:07 am    Post subject: Reply with quote

Sorry... Just getting started with all this stuff. I am using 0093 setup code for the TV. The power switch is a toggle and I want to be able to turn the TV on and off within a macro.

Thanks
Back to top
View user's profile Send private message
johnsfine
Site Admin


Joined: 10 Aug 2003
Posts: 4767
Location: Bedford, MA

PostPosted: Wed Dec 31, 2003 10:12 am    Post subject: Reply with quote

Assuming you really mean "discrete codes" (our terminology confuses some), always tell the setup code when you ask for discrete codes.

If you really meant something other than what we mean by "discrete codes" then answer the usual questions from the "sticky post". Do you have a Jp1 cable? Do you have a learning remote? What do a few of your learned signals decode as? etc.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
HkyFrk



Joined: 27 Dec 2003
Posts: 32

PostPosted: Wed Dec 31, 2003 10:16 am    Post subject: Reply with quote

thanks John... I have a cable and a 8811. I learned some codes to my remote from a different device, would that help? Should I learn the power and some other commands from the Sharp OEM remote to further help in my quest. Once again thanks for all the help.
Back to top
View user's profile Send private message
johnsfine
Site Admin


Joined: 10 Aug 2003
Posts: 4767
Location: Bedford, MA

PostPosted: Wed Dec 31, 2003 10:28 am    Post subject: Reply with quote

No need to learn any codes. I wrote my above message before I saw the two messages ahead of it.

TV/0093 is Sharp protocol, device 1. There is a lot of data on EFC codes for it at Rob's site
http://www.hifi-remote.com/cgi-bin2/ueic.cgi?TV_0093
but I don't see any discrete On or Of commands. There is much less data on it in my collection of CCF files (and again no discrete On or Off codes). You could try the commands not listed on Rob's site and see if you find any, but note the warnings there, plus it sounds like whoever reported that list already tried all the codes, so the discrete On and Off probably don't exist.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central