JP1 Remotes

JeradinG · Joined: 24 Nov 2006 Posts: 7

1. Device: mitsubishi HD1000u
2. Type of device: porjector
3. Year: 2007
4. JP1/UEI Remote model: URC-9910
5. Do you have a JP1 cable? yes
6. Still have original remote? yes
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? I am trying to convert learned buttons to a device upgrade for a mits HD1000 projector.

I uploaded the IR file... link below.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=5118

I hope I am doing this post right. My brain is a little dead after working on this for countless hours... well, the whole remote setup / extender... and such!

Thanks for your time.

Edit: sorry, I guess I was meant to post this in the Protocol Decodes area..

Mark Pierson · Posted: Mon Oct 22, 2007 6:09 pm Post subject:

The learned signals all decode as Proton with a Device of 240. They're all pretty straightforward... exactly what do you need help with?
_________________
Mark

JeradinG · Joined: 24 Nov 2006 Posts: 7

I tried to create an RM file with all those numbers, proton as device, a code 240... but it didnt work. Now I re did it for the 4th time and it worked.

Maybe I need more coffee.

Thanks for looking at my files, and my apologies for using up your time.

This forum is so great btw, thanks!!!

Dale