JP1 Remotes

Loschack · Joined: 20 Jun 2007 Posts: 6

Hi.

I've got some signals from my URC6690, which has learnt them from my original ADB remote. I've read that signals with IR 7.02, and I'm trying to put them into RM, but IR shows me only the protocol name (Dreambox) with some numbers - all in one column, without any OBC / HEX, etc. values - it looks like this

Any ideas where I can get these values from?

Regards.

Capn Trips · Expert Joined: 03 Oct 2003 Posts: 3990

2 things:

(1) You are better off uploading your learned IR file to the diagnosis area and posting a link to it here; and

(2) Your image link activates an automatic link to a gambling website, potentially causing some ... discomfort or embarrassment ... for those who work in an environment where access to such sites is prohibited.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!

Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)

Loschack · Joined: 20 Jun 2007 Posts: 6

(1) OK, I will, I just thought, that someone already have seen such situation and knows the solution how to read such protocol

(2) ??? it's a simple link to the image hosted by ImageShack (I've uploaded my screenshot there, as it was suggested in this sticky thread: http://www.hifi-remote.com/forums/viewtopic.php?t=6557

Regards

johnsfine · Posted: Wed Jun 20, 2007 7:24 am Post subject:

I need to find time to complete my changes to DecodeIR and protocols.ini for the XMP protocol (what in the earlier released versions was called "Dreambox").

The eight digit hex number at the end of each of those decodes gives all the information (that must go into fixed data and hex command in an upgrade using PID 016C) but I forget which hex digit goes where.

In the "Dreambox" decodes, we have an arbitrary assignment of various hex digits into "device", "subdevice", and "OBC". Your signal doesn't even fit within that assignment.

In the "XMP" decode system there is a different arbitrary assignment of the hex digits into "device", "subdevice", and "OBC". I think that version at least covers all XMP signals we've seen. But we don't have protocols.ini (or KM) support for that system (and I haven't distributed version 2.36 of DecodeIR.dll that reports these signals as XMP).

Loschack · Joined: 20 Jun 2007 Posts: 6

So, is there any chance to have my device (ADB nRecorder) integrated with the SlingBox?

Here ist that IR-File http://www.hifi-remote.com/forums/dload.php?action=download&file_id=4676

Regards.

binky123 · Expert Joined: 14 Feb 2004 Posts: 1292

Use RM, select your remote(Slingbox JU, PK, PL, RV), and the 016C protocol with device0=25 device1=63 device2=68 device3=42 which generates fixed data of 19 3F 44 2A.

Your OBC values will be the last 4 digits of your learned signals. CH+=09 00, CH-=20 00, VOL+=08 00, VOL-=28 00.

The Robman · Posted: Wed Jun 20, 2007 1:04 pm Post subject:

Capn Trips · Expert Joined: 03 Oct 2003 Posts: 3990

Oh I have pop-up blockers, but in my particular environment at work, the blocked pop-up triggers an alert, reporting that I attempted to access an unauthorised site, and if I get too many of those alerts, "questions" get asked.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!

Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)

The Robman · Posted: Wed Jun 20, 2007 2:33 pm Post subject:

Capn Trips · Expert Joined: 03 Oct 2003 Posts: 3990

I could tell ya, but then I'd hafta kill ya. Twisted Evil

Nah, it's OK for the occassional "hit", the powers that be understand that many such "re-directions" occur and are not deliberate attempts to engage in forbidden activities, but if a pattern emerges of many attempts to access forbidden sites, administrative actions can result, like loss of access Mad

, loss of security clearance Evil or Very Mad

, loss of job Crying or Very sad

, loss of family Rolling Eyes

. You know the drill.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!

Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)

Loschack · Joined: 20 Jun 2007 Posts: 6

It works! Thank you binky123 - you're the MASTER! Wink

Regards.

Marcyjok · Joined: 11 Dec 2005 Posts: 11

could you please post files to make our Dreamboxes work with Slingboxes?
thanks on behalf of all users
M.

nuvolona · Joined: 17 Jun 2007 Posts: 30

Loschack,
can you post a rmdu file for the dreambox remote? so that we can convert it to our slingbox bin format? thanks a lot!

binky123 · Expert Joined: 14 Feb 2004 Posts: 1292

The rmdu device upgrade here should be fine for the Dreambox.

nuvolona · Joined: 17 Jun 2007 Posts: 30

Hello binky123,
I can't get RM software to work, I downloaded it, even tried with old versions but when I click on the .exe file to install it, a popup shows up with the message "The trial has expired". I don't know why, because I never installed it anyway... maybe it doesnt support WinXP ?

Anyway, can you or someone else convert that rmdu file in the link to bin slingbox format? I want to test it, cause I tried all the other recent dreambox bin files in the upload and none of them is working. Thanks