JP1 Remotes

Hi guys,

I was hoping you could give me a steer in the right direction:

1. Device: Samsung DVD-1080P7
2. Type of device: DVD w Progressive Scan, HD Up Conversion
3. Year: 2007, just bought it
4. JP1/UEI Remote model: Outlaw Audio Remote
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes, I've tried 4 or 5 of them so far, no luck
8. Checked Pronto file section (at R/C)? Yes, they have 16 devices listed, but none seem to match up with my unit. Should I try the HD models first, like these?
9. Partially working setup code? None found
10. Learning remote question? n/a

So, maybe there's a Samsung model that maps to my 1080P7 ? I'm struggling to find it so far. I originally had a JVC-DVD unit mapped to my AUX1 button along with 4 other devices when I programmed my Outlaw remote a few years ago. But the JVC-DVD went out and I replaced with this Samsung. Any tips on which RDF file to use for this one ?

Much Appreciated,
Darren

DrD wrote:none seem to match up with my unit. Should I try the HD models first, like these?

Here is a summary of decodes of the ones of those files that I previously decoded. That should cut down on the time it would take you to test which might have the same code set as your model. (All the models using Aiwa:102.0 have the same Play signal, so if one doesn't work none of them will).

BH_93200 3.1.ccf - DVD 2: Samsung DVD-945 - (Aiwa):102.0
C_Palmer.ccf - Samsung DVD Player DVD-M205 - (Aiwa):102.0
Frederic_bultot_v1m2.ccf - Samsung DVD SV-DVD1E - (NECx2):5.5
Hasse.ccf - Samsung DVD Player DVD-M205 - (Aiwa):102.0
Home Theather 9.6.03.ccf - Samsung DVD Player DVD-HD931 - (Aiwa):102.0
Justin.text(10):Samsung DVD Player DVD-709 - (Aiwa):102.0
Main V4.0.ccf - Samsung DVD Player DVD-HD841 - (Aiwa):102.0
MyCCF.ccf - Samsung DVD Player DVD-709 - (Aiwa):102.0
P721M.ccf - Samsung DVD Player DVD-P721M - (Aiwa):102.0
RC 9200.ccf - Samsung DVD Player DVD-709 - (Aiwa):102.0
Samsung DVD 807 v1.0.ccf - Samsung DVD Player DVD-807 - (Aiwa):102.0
Samsung DVD511.ccf - Samsung DVD Player DVD-511 - (Aiwa):102.0 (Aiwa):110.0
TomerLitvin.ccf - Samsung DVD-705 - (Aiwa):102.0
jimmy63.ccf - Samsung DVD Player DVD-709 - (Aiwa):102.0
randman_v25.ccf - Samsung DVD Player DVD-HD931 - (Aiwa):102.0
samsung909.ccf - Samsung DVD Player DVD-909 - (Aiwa):102.0

DrD wrote:Any tips on which RDF file to use for this one ?

I assume you didn't really mean "RDF".

Samsung DVD players tend to fall into two camps, one that uses the Aiwa protocol with a device code of 102 and another that uses the NECx2 protocol with a device code of 5.

Here are some upgrades files, from the file section that are representative of each group...

Samsung DVD HD-841 (uses Aiwa, device 102 - like DVD/0573)
http://www.hifi-remote.com/forums/dload ... ile_id=674

Samsung DVD-HD850 (uses NECx2, device 5)
http://www.hifi-remote.com/forums/dload ... le_id=2660

I'd be inclined to try the HD850 file first as this is an upconversion player.

There are also a couple of files that use custom execs...

Samsung BD-P1000 BluRay (uses $01B5)
http://www.hifi-remote.com/forums/dload ... le_id=3453

Samsung DVD HR725 (uses $015C)
http://www.hifi-remote.com/forums/dload ... le_id=3168

Apparently, it uses the same remote as the DVD-HD960. Here's an RM file for the DVD-HD960:
http://www.hifi-remote.com/forums/dload ... le_id=3507

and here's an almost identical KM file for the DVD-1080P7:
http://www.hifi-remote.com/forums/dload ... le_id=4605

In fact, I just compiled a maste list from all the Samsung files that use Aiwa 102 and while some files have codes that the others don't, all of the main functions match...

http://www.hifi-remote.com/forums/dload ... le_id=4606

Excellent, thanks for the help. Rob that KM file worked perfectly for me. I only had to remap one key (SELECT->ENTER), and the rest was exactly as I wanted it. Can't thank you enough for the support.

Darren