Pinuzz
Joined: 22 Dec 2003 Posts: 3
|
Posted: Mon Dec 22, 2003 8:32 pm Post subject: IRtowav 9960 works |
|
|
Hi, this is my first post.
I'm a programmer, and a couple of day ago I bought a 9962 (9960), here in Canada.
All my equipment works well with this remote, but the Harman Kardon AVR125 doesn't work with code 0110.
So I discovered this beautifull furum and made some experiment with all software you guy are using.
I don't have an Jp1 interface but I user RM and IR starting from a similare txt coming from an AVR300 (similar to 125).
After this I used IRtoWav and downloaded by speaker into the phone.
The code worked (not in full) but at 75% of original remote (I lost the original! so this is the only way because I can't learn from it!).
The only problem is that the wav cover the full memory, so it erase all macro and setting, but the code I used (1110) works.
After I reprogrammed the other codes, but sometimes the remote's light is always on!
I made a reset using 977 and repeat the procedure and now works.
I suggest, if someone has the Kameleon 9960 to post the TXT for IR (a complete dump) so we can start from it and adding new codes.
I think is a good idea.
I don't know how to make the wav short!
Thanks for help |
|