JP1 Remotes

Posted: **Thu Apr 19, 2007 3:00 pm**

Please excuse my newbie-question but is there a way to convert the following lirc file for use with JP1 interface (Dreambox Remote):

Code: Select all

begin remote

  name  RC660
  bits           16
  flags RCMM|CONST_LENGTH
  eps            10
  aeps          130

  header        500   185
  three         217   700
  two           240   560
  one           217   367
  zero          240   185
  ptrail        250
  pre_data_bits   16
  pre_data       0x2290
  gap          16777215
  toggle_bit      17
  min_repeat       0
  frequency    36000
  duty_cycle   50

      begin codes
          0                        0x0000
          1                        0x0001
          2                        0x0002
          3                        0x0003
          4                        0x0004
          5                        0x0005
          6                        0x0006
          7                        0x0007
          8                        0x0008
          9                        0x0009
          INFO                     0x000F
          OK                       0x005C
         STAND_BY                  0x000C
          MUTE                     0x000D
          CURSOR_RIGHT             0x005B
          CURSOR_LEFT              0x005A
          CURSOR_UP                0x0058
          CURSOR_DOWN              0x0059
          VOLUME_UP                0x0010
          VOLUME_DOWN              0x0011
          RED                      0x006D
          GREEN                    0x006E
          YELLOW                   0x006F
          BLUE                     0x0070
          EPG                      0x00CC
          EXIT                     0x0055
          MENU                     0x0054
          CHANNEL_UP               0x001E
          CHANNEL_DOWN             0x001F
          PLAY                     0x0038
          STOP                     0x0031
          RECORD                   0x0037
          PAUSE                    0x0039
          FASTFORWARD              0x0020
          REWIND                   0x0021
          TEXT                     0x003C
      end codes

end remote

this is from a kathrein ufs-910 hdtv sat receiver

thanks a lot
captaint

Posted: **Sun Apr 22, 2007 12:33 pm**

nobody can help?

Posted: **Sun Apr 22, 2007 6:12 pm**

The format of this protocol sounds familiar but I don't recall which one it is. As it appears to be part of the RC6 family, I was hoping that John would jump in.

Posted: **Wed May 02, 2007 1:22 pm**

really nobody an idea?

Posted: **Wed May 02, 2007 2:02 pm**

OK, I took a closer look at the data and it appears to be the Nokia32 protocol, so give this upgrade a try...

http://www.hifi-remote.com/forums/dload ... le_id=4536

Posted: **Sun May 06, 2007 2:48 pm**

sorry for my late answer and thank you really much for trying to help me.
I have tried your km-file but it does not work for me. Do you perhaps have another idea?

thanks alot
captaint

Posted: **Sun May 06, 2007 6:26 pm**

Not really. Describe "does not work", do you mean the BIN file that you created wouldn't load, or do you mean that it loaded OK but didn't work the device.

JP1 Remotes

KATHREIN UFS 910 HDTV Sat (lirc data)

KATHREIN UFS 910 HDTV Sat (lirc data)