View previous topic :: View next topic |
Author |
Message |
Gleb96
Joined: 18 Apr 2007 Posts: 1
|
Posted: Wed Apr 18, 2007 12:36 pm Post subject: X10 iconRemote |
|
|
Does anyone know what I need to use my X10 iconRemote to control the lights in my home theater? I'm not sure if this is possible, but I would assume so. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21258 Location: Chicago, IL |
Posted: Wed Apr 18, 2007 12:44 pm Post subject: |
|
|
Did it come with a manual, and if so, doesn't it explain what you need to do. This is an X10 remote, so it look pretty bad on X10 if one of their own remotes didn't work X10 gear. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4509
|
Posted: Wed Apr 18, 2007 1:45 pm Post subject: |
|
|
AFAIK, the icon is not RF, and would therefore need an IR543 to control your lights. |
|
Back to top |
|
|
tennessee titan
Joined: 18 Nov 2008 Posts: 117
|
Posted: Tue Mar 30, 2010 7:28 pm Post subject: |
|
|
Just FYI: Current icons ARE RF capable... |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Wed Mar 31, 2010 8:26 am Post subject: |
|
|
If a remote is RF capable, it usually will not control X-10 devices by itself. It still needs the IR543 to receive the signals from the remote and turn it into the correct RF for the X-10 devices.
Remotes that are RF capable usually talk to their own RF receiver and the receiver then emits IR at a remote location. The only exception would be a remote that claims it can control X-10 devices, just saying RF is not enough.
OOPS, I should have read more before posting. This remote apparently does fall into the very small number of remotes that can control X-10. You just need the small receiver that takes the RF and injects it into your house power system. Like this: http://www.x10.com/promotions/tm751_single_si.html If you already have X-10 devices controlled by an X-10 RF push button device, you already have this. |
|
Back to top |
|
|
garyb.ncc
Joined: 25 Jan 2010 Posts: 37
|
Posted: Wed Mar 31, 2010 2:40 pm Post subject: |
|
|
From the manual Quote: | When triggering an X10 module or wall switch using the IR32A IconRemote, the signal is typically sent from the remote using RF on a specific house code. The RF signal is received by the transceiver (either TM751, RR501, CM15A, or security console) on the matching house code. The transceiver then forwards the signal onto the house wiring. This is now a PLC signal. Any modules that match the house and unit code transmitted will either turn on or off, depending on the signal sent. | So the remote will work with several RF transceivers. If buying one I would suggest the RR501 over the TM751. The RR501 can transceive all house codes and the TM751 can not. There is probably not more than a $5 difference in cost.
Of course the IR543 can be used for transceiving X10 infrared. _________________ Gary |
|
Back to top |
|
|
|