View previous topic :: View next topic |
Author |
Message |
e.axel Exile Island Resident
Joined: 03 Feb 2006 Posts: 209
|
Posted: Tue Apr 03, 2007 9:40 am Post subject: Can't disable channel lock-Sci Atl 8300 remote |
|
|
The remote for the Scientific Atlanta 8300 DVR has a default setting where it disables TV & VCR channel buttons. I have my remote programmed to TV code 0000 Sony, it doesn't control any of the channel change functions. I tried disabling it by Cable - Select - 2 blinks - 973 -2 blinks - Channel Down - 4 blinks per the instructions but it doesn't enable TV channel selection as it should. All other functions work.
My 8811 programmed to TV 0000 works fine.
Any suggestions? |
|
Back to top |
|
|
e.axel Exile Island Resident
Joined: 03 Feb 2006 Posts: 209
|
Posted: Tue Apr 03, 2007 4:13 pm Post subject: |
|
|
Well, I didn't fix it, but I made it work by learning the commands onto the channel keys. I still don't know why it won't unlock.
BTW: This is a JP1.3 remote. Is it compatible with JP1.x cable & programming?
Another BTW: Does anyone know the code for the "ON DEMAND" button? |
|
Back to top |
|
|
kupakai
Joined: 29 Sep 2006 Posts: 283 Location: New York |
Posted: Wed Apr 04, 2007 12:51 pm Post subject: |
|
|
e.axel wrote: | This is a JP1.3 remote. Is it compatible with JP1.x cable & programming? |
If you are talking about the Atlas 5 w/Day remote, it works fine with JP1.x cable. I have a non-learning version connected via homemade JP1.x cable with no problems. The RDF for it is here.
e.axel wrote: | Does anyone know the code for the "ON DEMAND" button? |
If you are talking about the EFC, I've seen it usually programmed with a macro for pressing CBL;1;OK, or something like that, and no command (hence EFC) mapped to it. |
|
Back to top |
|
|
e.axel Exile Island Resident
Joined: 03 Feb 2006 Posts: 209
|
Posted: Wed Apr 04, 2007 2:09 pm Post subject: |
|
|
Thank you! |
|
Back to top |
|
|
|