Want to purchase remote preloaded

visco · Post by **visco** » Mon Feb 26, 2007 11:05 am

I have been looking to find a remote to work with my ADCOM GTP-500 tuner/preamp. I was directed here and would appreciate any help. Understand it can be configurated ffor my equipment. Could i get a price for a unit to include the GTP-500 and the ADCOM GCD-575 cd player

Thanks Paul

paulviscontini@yahoo.com

johnsfine · Post by **johnsfine** » Mon Feb 26, 2007 11:31 am

I assume Rob will see your post and reply, but meanwhile you should review the list of models he has available at
https://www.hifi-remote.com/forums/viewtopic.php?t=413

Any JP1 or JP1.2 ready remote he has could be equally well configured to include those two upgrades. So you should look for some pictures of those remotes and decide which you like.

The two upgrade files needed are already posted
https://www.hifi-remote.com/forums/dload ... file_id=55
https://www.hifi-remote.com/forums/dload ... ile_id=126
so I don't think Rob would charge much extra to load them in.

The author of those files configured them for the buttons of the 15-2116, but that's quite easy to change if the 15-2116 isn't the model you prefer.

I think Rob is the only vendor preloading setup codes in remotes he sells.

Post by **The Robman** » Mon Feb 26, 2007 11:37 am

I can preload those codes into a remote for you. I would recommend the URC-8910 remote, which is $20. I can't guarantee that the preloaded codes will work, but I would be surprised if they don't.

If you'd also like a parallel JP1 cable, which gives you the option of programming the remote yourself, I can include one for $15.

visco · Post by **visco** » Mon Feb 26, 2007 7:42 pm

Thanks

Sounds like $24 shipped for the 8910 but not sure of your Paypal address. Let me know you PP and if I missed anything . zip is 32312.
I appreciate the help. This is for the GTP-500 CD-575 Adcom components

email is paulviscontini@yahoo.com for any other info/etc

Paul

greenough1 · Post by **greenough1** » Mon Feb 26, 2007 9:37 pm

In the marketplace post, go to page 1. There is all the info you need to make a paypal payment to Rob. email him (see the general forum since he's having some email issues today - look for a thread with email address in the title) if you have questions.
Best,
jeff

Post by **The Robman** » Tue Feb 27, 2007 7:35 am

visco wrote:Thanks. Sounds like $24 shipped for the 8910 but not sure of your Paypal address. Let me know you PP and if I missed anything . zip is 32312.
I appreciate the help. This is for the GTP-500 CD-575 Adcom components

email is paulviscontini@yahoo.com for any other info/etc

Paul

Follow the "remotes for sale" link in my sig for all the info, and be sure to include a note in the paypal transaction regarding the codes that you want loaded.

visco · Post by **visco** » Wed Feb 28, 2007 7:54 pm

Thanks for the help