Page 1 of 1

PRO BRAND Int.,Inc. DIGITALSTREAM HD 3150

Posted: Thu Feb 15, 2007 7:34 pm
by Dennis
1. Device: PRO BRAND Int.,Inc. DIGITALSTREAM HD 3150
2. Type of device: Digital STB
3. Year: 2004
4. JP1/UEI Remote model: URC-6131N
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a

Posted: Thu Feb 15, 2007 10:21 pm
by The Robman
According to the following thread, this box is the same as the Accurian HDTV receiver sold at Radio Shack...
http://www.remotecentral.com/cgi-bin/mb ... .cgi?26249

If that's true, this upgrade should work for you...
https://www.hifi-remote.com/forums/dload ... le_id=2723

For anyone else wondering what this device is, I've found some info...

http://www.eagleaspen.com/products/products_1.php?id=44
http://www.eagleaspen.com/admin/downloa ... ile_53.pdf
http://products.howstuffworks.com/pro-b ... review.htm

Posted: Fri Feb 16, 2007 9:35 pm
by Dennis
Thanks Rob. I will not be able to test this until next weekend, but I will post a follow-up then with my results.

Posted: Sat Feb 24, 2007 1:56 am
by Dennis
Hi Rob,

The upgrade for the Accurian HDTV receiver did not work. So, I used an 8910 OneForAll remote to learn the signals from the original HD3150 remote control. It turns out the two HDTV receivers use different device and sub-devices codes. The Accurian upgrade uses an NEC1 protocol with a device of 1, while the HD3150 receiver has a device code of 4 and a sub-device of 2. The EFC values were the same.

I uploaded an upgrade to the file section:
https://www.hifi-remote.com/forums/dload ... le_id=4264

Thanks. :D