Polaroid TTM-2420 TV

If you have learned signals that don't get decoded when you look at them in IR.exe, post your file to the Diagnosis Area then post your question here (including a link to the file).

Moderator: Moderators

Post Reply
Mikes7339
Posts: 2
Joined: Sat Dec 09, 2006 11:34 pm
Location: Phoenix AZ

Polaroid TTM-2420 TV

Post by Mikes7339 »

I have a new TV with an unknown protocol.

1. Device: Polaroid TTM-2420
2. Type of device: TV
3. Year: 2006
4. UEI Remote model: RS 15-2116
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? No

I have upload a file with learned codes at:
http://www.hifi-remote.com/forums/dload ... le_id=3925

Any help would be appreciated.
Thanks
Top
The Robman
Site Owner
Posts: 21886
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

This set uses the same signals as Insignia NS-27HTV...

http://www.hifi-remote.com/forums/viewtopic.php?t=7448
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
Mikes7339
Posts: 2
Joined: Sat Dec 09, 2006 11:34 pm
Location: Phoenix AZ

Post by Mikes7339 »

Thanks Rob for your help.

I've created a KM file with the correct key mappings for the Polaroid TTM-2420 TV. UEI shows code 1326 for this TV so that's the code I used in the KM file.

http://www.hifi-remote.com/forums/dload ... le_id=3937
Top
Post Reply

Return to “JP1 - Protocol Decodes”