JP1 Remotes

swazz99jhb · Joined: 06 Dec 2006 Posts: 7 Location: JHB, South Africa

Howzit Guys and Girls.

I've learned my tower fan commands on the AUX device.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3913

I've tried the tower fan Protocol for the Air Tech but that doesn't seem to do the trick.

Kind Regards

The Robman · Posted: Wed Dec 06, 2006 3:06 pm Post subject:

I have created an upgrade for you to try in your URC-8910. I have assigned the 4 buttons to the 4 arrow buttons. In order to create a KM file for this, I would need to know what the 4 functions are.

Upgrade Code 0 = DF D0 (Home Auto/2000) Russel Hobbs Tower Fan (KM v8.43)
FF 00 06 C1 24 F8 BC EC DC
End

Upgrade protocol 0 = 01 FF (S3C8+) Russel Hobbs Tower Fan (PB v4.00)
43 8C 11 8B 0E 85 01 06 06 00 D3 02 66 02 7A 00
BF 0D 37 8D 01 46
End
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

swazz99jhb · Joined: 06 Dec 2006 Posts: 7 Location: JHB, South Africa

Thanx for the quick response.

I haven't had time to actually get the new protocol onto my remote, but will be doing so over the weekend.

I'll be playing with KM myself a bit, but thanx anyway.

A question: Do I need to load the protocol onto the remote and re-learn the commands to get sinceable values that I can enter into KM or how did you get the EFC value to enter into KM?

Tx

The Robman · Posted: Fri Dec 08, 2006 8:30 am Post subject:

You don't need to relearn anything. You just need to cut & paste the two blocks of code (ie, one device upgrade and one protocol upgrade) into IR, then yu need to assign HOME/2000 to one of the device buttons. You don't need to use KM or RM for this exercise.

If you use AUX, make sure that you delete your old learned signals, or they will override the upgrade.

The one piece of info I do need from you in the meantime, is what do these buttons actually do? In other words, how are the buttons labelled on the original remote and, if it's not obvious, what function do they perform? Please also state which button you learned them to (ie, POWER, MOVE, SWAP and SLEEP) so I know which codes goes with each function.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

swazz99jhb · Joined: 06 Dec 2006 Posts: 7 Location: JHB, South Africa

Hi.

I've tried the protocol and devices upgrades you posted , but no luck.

I've relearned all commands and u/l it again.

Link :http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3913

Power => Power
Left => Wind Effect
Right => Speed
Up => Oscillate
Down => Timer

In stead of you just giving me the upgrades, how does one go about decoding the learned commands into a protocol and devices codes(EFC).

Thanks for all the help.

The Robman · Posted: Sun Dec 10, 2006 6:38 pm Post subject: Re: Relearned Codes

The Robman · Posted: Sun Dec 10, 2006 7:24 pm Post subject:

I've compared the timings produced by my protocol and they're almost identical to the ones from the OEM remote, so I'd like to eliminate the possibility that this is a case of user error before I try and fix the executor.

Therefore I have added the upgrade to your IR file myself. I've assigned it to the AUX button and I've laid out the functions exactly how you learned them. Could you load this IR file into your remote and try it out please.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3928

Here's the KM file...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3929
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!