View previous topic :: View next topic |
Author |
Message |
Chester
Joined: 28 Dec 2004 Posts: 30
|
Posted: Mon Jun 30, 2008 2:50 pm Post subject: extender A7 on 10820 |
|
|
I'm using the extender all is well but cannot seem to get the Aux-2 device
to work I am using “p-aux2 v-aux2” and so on, but when I use the macro nothing changes It remains with the last keyset active.
also
Device multiplex bug -- last active device will get executed on device multiplex eg last key pressed = (Tv)-3 Then (sat) device multiplex is executed then (Tv) device will beome new device code.
The work around is to do a macro and call device mutiplex from it with a comand on the designated device first (must be a mapped key)
Also Thanks to the Author It works Great |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Mon Jun 30, 2008 3:09 pm Post subject: |
|
|
Hi Chester. I only tested this on the 8820, but I now have a 10820. Unfortunately, I have packed all my remote stuff away because we're trying to sell our house, and a "remote room" wouldn't show too well , but if you post your IR file, I'll try to look into it. However I might not get to it soon because I have boxes of remotes tucked away everywhere and no idea where the 10820 would be! I do have one suggestion. Make sure that punch thorugh is turned off on the general tab in IR. All testing was done with those off. |
|
Back to top |
|
|
Chester
Joined: 28 Dec 2004 Posts: 30
|
Posted: Mon Jun 30, 2008 7:28 pm Post subject: |
|
|
Hi vickyg2003 I posted the file
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=5628
It is kind of complicated but if your into it please do
The extender is working good but it is just the two issues.
And ir file is still a work in progress
Good luck selling your house my wife sells real estate |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Mon Jun 30, 2008 8:10 pm Post subject: |
|
|
Chester, I popped open your IR file, and right away I see your AUX2 button sets everything to AUX2 and then proceeds to reset it t to SAT. So that would probably be why your AUX2 button doesn't work.
Now as far as the multiplex, I think when you describe your bug, you are telling me that when you are in TV and you press your multi-plex key, the TV is being set to the multi-plex code even though the multiplex code is a SAT setup. That would be correct operation. |
|
Back to top |
|
|
Chester
Joined: 28 Dec 2004 Posts: 30
|
Posted: Mon Jun 30, 2008 8:21 pm Post subject: |
|
|
DUH
I must have looked at that a hundred times and did not see it thanks for the quick response Ill try it later but am sure that it what the problem is
I was sure I was doing something Dumb
Thanks
And No you are not in tv mode you ae in sat mode but the tv mode chages
to the new code if you dont use a sat key first |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Jul 01, 2008 8:40 am Post subject: |
|
|
Quote: | And No you are not in tv mode you ae in sat mode but the tv mode chages to the new code if you dont use a sat key first. |
Hmm. By definition, the sat-multiplex is a SAT key so I wonder how its switching back to TV for the set? I wonder if you could do a very simple IR file and test this to make sure its my bug and not yours. Your stuff is so complicated that its difficult for me to follow even though you did a nice job of documenting your file. |
|
Back to top |
|
|
Chester
Joined: 28 Dec 2004 Posts: 30
|
Posted: Tue Jul 01, 2008 11:12 am Post subject: |
|
|
Yes I had a good exaple set up for trouble shooting I will recreate it and post
are there any upgrades/codes that would be best for you
Echostar 301 sat and Sony tv code "0000" is what I have |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Jul 01, 2008 11:26 am Post subject: |
|
|
It doesn't really matter which codes. I just want to see the construction of the macro. If its your bug, I should be able to spot it easy enough. If its my bug, then I have to hunt for my equipment, wherever it might be. |
|
Back to top |
|
|
Chester
Joined: 28 Dec 2004 Posts: 30
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Jul 01, 2008 12:56 pm Post subject: |
|
|
Chester that's an excellent test file.
So after you reset,
Press SAT
Press M1
Press TV
The Volume buttons no longer work, but they work in SAT mode, indicatiing that the code went to TV instead of SAT.
If press any keys after reset, then press SAT, then M1, then TV, is everything OK?
If that's the case, then it sounds like a register isn't getting reset properly on O_ keys. |
|
Back to top |
|
|
Chester
Joined: 28 Dec 2004 Posts: 30
|
Posted: Tue Jul 01, 2008 1:08 pm Post subject: |
|
|
vickyg2003 wrote: |
If press any keys after reset, then press SAT, then M1, then TV, is everything OK?
If that's the case, then it sounds like a register isn't getting reset properly on O_ keys. |
the code will go to the device that had the last key press
so if you go to "vcr" and press "1" then goto "sat" and press m1 vcr will get the new code eg."2021" |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Jul 01, 2008 6:38 pm Post subject: |
|
|
Have you tried the multiplex for the unextended 10820. It would take more upgrade space, but it should work. |
|
Back to top |
|
|
Chester
Joined: 28 Dec 2004 Posts: 30
|
Posted: Tue Jul 01, 2008 8:55 pm Post subject: |
|
|
Yes it works normally I was using it unextended until this weekend I bought a 8910 and got playing with it and then seen the A7 extender and tried it out
The extender is working well and the workaround is simple enough. Although
I am finding it hard to believe no one else has had the same issue
Also the AUX-2 device still does not work that test file should show that also
When reset, start the extender, then press "aux-2" the volume buttons are NOT mapped on the "aux-2" device and the tv device has the volume buttons mapped
Did you try the test file?
Did you find the same as me? |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Wed Jul 02, 2008 5:49 am Post subject: |
|
|
Chester, I don't think anyone has tried the extender on the 10820. When I was writing that extender I only had the 8820. I started digging around, and found my 10820, but can't locate my cables, so no, I haven't tried the test file. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Wed Jul 02, 2008 10:21 am Post subject: |
|
|
I pulled down my source code, and am wondering if at some point I've capped the HT 1 too low. The 0 vs 1 based arrays really goof me up. I'll try to find my cables, to check this out. |
|
Back to top |
|
|
|