Kameleon JP1 pin layout

This is the JP1 beginners forum. There's no such thing as a stupid question in here, so post away, but this forum is just for JP1 users and people considering JP1, non-JP1 users please use the appropriate forum above!

Moderator: Moderators

Post Reply
Mog
Posts: 49
Joined: Wed Jun 02, 2004 10:16 am

Kameleon JP1 pin layout

Post by Mog »

:oops:
It's so long since I programmed my Kameleon 8060, I can't remember which way around the cable has to be connected!

My cable was from HovisDirect, who aren't trading any more, and I haven't managed to find a picture anywhere.

( I keep getting 'No response from remote' )
Help!
John Oseman
Top
The Robman
Site Owner
Posts: 21888
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

Try it both ways, if it doesn't work either way then you have a problem. (and no, you won't damage the remote by connecting the cable the wrong way around).
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
Mog
Posts: 49
Joined: Wed Jun 02, 2004 10:16 am

Post by Mog »

Thanks for that, it's good to know that it should work either way.

It turns out that this was a battery issue - I tried a freshly recharged
set the next day, and normal service has been resumed :)
John Oseman
Top
johnsfine
Site Admin
Posts: 4766
Joined: Sun Aug 10, 2003 5:00 pm
Location: Bedford, MA
Contact:
Contact johnsfine

Post by johnsfine »

Mog wrote:Thanks for that, it's good to know that it should work either way.
Sounds like you misunderstood.

What Rob said means it should work one way and do no harm (but not work) the other way.
Top
Post Reply

Return to “JP1 - Beginners”