JP1 Remotes

ProKoPio1 · Joined: 31 Oct 2003 Posts: 6

I have a 8550 but don't works fine.
It`s only works at 0,5 meters of receiver no more.
I have changed the crystal and a transistor but nothing matter.
Anyone knows why I can do?

uwereinert · Posted: Fri Oct 31, 2003 4:11 pm Post subject:

1. Try fresh batteries. 2. The Topline does have 2 IR-LED's. It's possible that one is defectice too. You can check this with an internet camera or a camcorder, such devices are able to see the IR light.

Uwe

The Robman · Posted: Fri Oct 31, 2003 6:20 pm Post subject:

Hi PKP,
What is your native language? We may have someone here who speaks it that can help you.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

ProKoPio1 · Joined: 31 Oct 2003 Posts: 6

ProKoPio1 · Joined: 31 Oct 2003 Posts: 6

I'm spanish.
Batterys are fresh really. I have try the IR diodes, I don't know if only one runs. They looks diferents one than the other.
Allways the two IR diodes woks at the same time?

uwereinert · Posted: Sat Nov 01, 2003 7:03 am Post subject:

jamesgammel · Posted: Sat Nov 01, 2003 8:09 am Post subject:

Go close to a device. Cover one IR diode and press a button that should make the device react. Then cover the other and do the same thing. If the device responds both times, both diodes are working. If it responds only once, the diode left uncovered is working and the other is not.

Jim

ProKoPio1 · Joined: 31 Oct 2003 Posts: 6

both diodes are working, but only near the device.

ProKoPio1 · Joined: 31 Oct 2003 Posts: 6

I have changed the two IR leds an the remote is running very good.
Thanks to everybody.

The Robman · Posted: Sat Dec 13, 2003 1:31 pm Post subject:

Well done
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!