1. Device: XBox
2. Type of device: Game console/DVD
3. Year: 2004
4. JP1 Remote model: Dreambox URC-39730 B02 (sig "OUKAOUK1")
5. JP1 user? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes, Xbox-clone. Boquet+/Boquet- corresponds to skip fwd/rwd.
10. Learning remote question? Yes, I bought an Xbox RC knock off which is learning. Although I don't think it's UEI. I opened it up and found a six pad assemblage however it could hardly be a JP1 connector. So the learning remote just doesn't do any good.
XBox
Moderator: Moderators
-
The Robman
- Site Owner
- Posts: 21890
- Joined: Fri Aug 01, 2003 9:37 am
- Location: Chicago, IL
- Contact:
Re: XBox
Which remote is that, I've never heard of it. Is this your only JP1 remote?hunden wrote:4. JP1 Remote model: URC-39730 B02
Are those the only buttons that do anything?hunden wrote:9. Partially working setup code? Yes, Xbox-clone. Boquet+/Boquet- corresponds to skip fwd/rwd.
This question is only relevant if you have a JP1 learning remote, which you don't.hunden wrote:10. Learning remote question? Yes, I bought an Xbox RC knock off which is learning. Although I don't think it's UEI. I opened it up and found a six pad assemblage however it could hardly be a JP1 connector. So the learning remote just doesn't do any good.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
-
underquark
- Expert
- Posts: 874
- Joined: Mon Jun 20, 2005 4:58 am
- Location: UK
Some sort of Dreambox remote discussed here.
-
The Robman
- Site Owner
- Posts: 21890
- Joined: Fri Aug 01, 2003 9:37 am
- Location: Chicago, IL
- Contact:
Re: XBox
Then check the upgrade to see if there are obvious gaps in the OBC sequence. If there are, try those to see if they are the arrow buttons.hunden wrote:After further testing I found that in addition the numeric keys also work. So for basic functionality, all that I'm missing are the arrow keys plus OK.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Hello again.
I have now tested a series of OBCs, namely 1-16, 23-32, 40-64, 39-128, 139-150. In other words all those with in the range 1-150 not already covered in the upgrade file. I added new functions with a new OBC, then in the buttons tab (of RM) I assigned those to buttons and finally copy/pasted the upgrade code to IR. I hope that is the correct procedure. The results were puzzling to me. Testing OBCs in chunks of ~30 I often got the same function out of more than one button, and then after pushing a button on the original remote I'd get another or no function from the same buttons.
I have now tested a series of OBCs, namely 1-16, 23-32, 40-64, 39-128, 139-150. In other words all those with in the range 1-150 not already covered in the upgrade file. I added new functions with a new OBC, then in the buttons tab (of RM) I assigned those to buttons and finally copy/pasted the upgrade code to IR. I hope that is the correct procedure. The results were puzzling to me. Testing OBCs in chunks of ~30 I often got the same function out of more than one button, and then after pushing a button on the original remote I'd get another or no function from the same buttons.