Page 1 of 1
Problems with old 6131
Posted: Tue Apr 04, 2006 10:18 am
by jkbarry
My hard drive died and I am having to add a new device to my 6131, I reinstalled IR and the definition files. When I run IR and choose to upload from device I get
----No Definition file could be found for remote (pvr0pvr0)
I have a 6131 file in my RDF directory. What am I doing wrong?Its an old 6131B that I bought from Rob last year (or maybe 2 years ago). Any help would be appreciated.
Re: Problems with old 6131
Posted: Tue Apr 04, 2006 10:44 am
by Mark Pierson
jkbarry wrote:I reinstalled IR and the definition files.
----No Definition file could be found for remote (pvr0pvr0)
I have a 6131 file in my RDF directory.
Did you set the RDF path in IR so it can find the files?
Posted: Tue Apr 04, 2006 11:20 am
by Nils_Ekberg
Also make sure you do have the RDF that starts with pvr0pvr0 in the directory as there are a couple of rdf's for extenders and the base.
Posted: Tue Apr 04, 2006 1:50 pm
by jkbarry
yes I have the directory set for the rdf. I dont have an rdf that starts with pvr0pvr0. My remote is the URC-6131B. Do I need to start over? Would that even work?
Posted: Tue Apr 04, 2006 2:19 pm
by The Robman
There's no such remote as a URC-6131B. There's the original URC-6131 (sometimes called URC-6131M where the "M" means modified) and the newer URC-6131N. Both use the same PVR0PVR0 RDF, so if you didn't extract that one from the RDF zip file, that's the cause of your problems.