JP1 Remotes

Device: Sony DST-SP5
Type of device: Satellite receiver for SkyPerfecTV
Year: 2004
JP1 Remote model: RM-J320D
JP1 user? No
Still have original remote? Yes
Checked the file section? Yes
Checked the Pronto file section (at R/C)? Found the following ccf file that contains a SkyPerfecTV section: http://www.remotecentral.com/cgi-bin/fi ... rea=pronto
Partially working setup code? No

I finally found a ccf file for a similar receiver and was able to make bin files for the SlingBox. I've made them available here:

http://www.capaho.com/SkyPerfecTV_DST-SP5.zip

I will also upload the rmdu file to the file section here.

Here's the link to the RM file:
https://www.hifi-remote.com/forums/dload ... le_id=3005

Hey Carl,
Could you post a link to the CCF file that you found please.

Thanks,
Rob

Hi Rob,

I found the ccf file here:

http://www.terra.dti.ne.jp/~watoc/pront ... 040427.zip

Carl

Thanks Carl. I had a chance to look at your RMDU file. I notice that you're using the Sony combo protocol, even though all of the buttons for this device use the same protocol and device code (ie, Sony20 26.113).

Looking at the CCF file, I see that there are additional functions in there that aren't in your upgrade file, so I have created an upgrade file that uses the simple Sony20 protocol and includes the extra buttons, though I don't know what most of them do.

Here's the file...
https://www.hifi-remote.com/forums/dload ... le_id=3009

Thanks for the updated file, Rob. The original CCF file was for an older model receiver than the one I have. Most of the buttons I left out were for functions I don't have on my remote. Fortunately, functions from the CCF file that are common to both receivers work on my receiver and allow me to control it through the SlingBox.

Carl