JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Need long press key command to POWER on

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
Kirkenes_99



Joined: 27 Mar 2006
Posts: 8
Location: Gelenau, GER

                    
PostPosted: Mon Mar 27, 2006 5:23 pm    Post subject: Need long press key command to POWER on Reply with quote

Hi,

My Panasonic TV need a command to power on for 2 secs with a single
press. When I create a macro for turning on my system (Dreambox 7000,
Yamaha RXV-795 and Panasonic TX29-AT1) the TV doesn't turn on, because the power on command is to briefly.
I'm using the "Panasonic_TX-21AT1_TV.txt" Device Code from the JP1
File Section (Panasonic Multi-Device Hacked, Protocol ID 0042).
Is there a way to modify this Protocol for repeating the power on command.
My Remote is a URC-39730-B02-00 Dreambox V3.
The discrete On/Off commands for Panasonic On=EFC 022 Off=EFC 026
doesn't work on my TV. Only the EFC 024 is working.

Best Regards
Mary
Back to top
View user's profile Send private message
zhezhang



Joined: 22 Sep 2003
Posts: 16

                    
PostPosted: Mon Mar 27, 2006 5:56 pm    Post subject: Reply with quote

I have a 4 year old Panasonic plasma. The ON command only works if I send 4-5 in a row (very quickly, in a Macro). If I don't do that the TV will turn on then switch back off, and will be not responsive to the remote anymore until I turn off and on the power at the TV. Maybe this will work for you too.

Good luck
Back to top
View user's profile Send private message
Kirkenes_99



Joined: 27 Mar 2006
Posts: 8
Location: Gelenau, GER

                    
PostPosted: Tue Apr 11, 2006 6:06 pm    Post subject: Reply with quote

Done!

I used the Panasonic Combo Upgrade Protocol:

Upgrade protocol 0 = 00 cd (S3C80) Panasonic Combo
45 91 32 8b 12 8f 45 08 08 00 da 00 c6 00 da 02
7b 90 c9 06 d0 03 54 e4 05 08 b4 06 08 b4 07 08
20 11 8d 01 33
End

and inserted the followed bytes: E6 0D 05 to this:

Upgrade protocol 0 = 00 cd (S3C80) Panasonic Combo
45 91 32 8b 12 8f 45 08 08 00 da 00 c6 00 da 02
7b 90 c9 06 d0 03 54 e4 05 08 b4 06 08 b4 07 08
20 11 E6 0D 05 8d 01 33
End

the bytes E6 0D 05 means the send IR-command Repeat Value: 5x times (05); Type: Forced; Hold: Yes ( E6 0D ).

I learned this by using Procol Builder-V3.12

sorry for my bad english

Best Regards
Mary
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control