Page 1 of 1
Yamaha CD upgrade file format?
Posted: Mon Feb 13, 2006 1:51 pm
by kwhumphreys
Can anyone tell me how to load this upgrade file:
https://www.hifi-remote.com/forums/dload ... ile_id=167
It looks like raw hex data, and RM reports that it cannot load it.
Thanks
Kevin
Posted: Mon Feb 13, 2006 2:20 pm
by Capn Trips
This is NOT a device upgrade file. It is an IR file with a bunch of learned signals - presumably from the Yamaha CD changer.
If you open it in IR, and look at the learned signals tab, it will give you decodes of a bunch of functions from which you can build an upgrade. What is unclear is what functions are learned to what buttons, since there are no notes with the file.
Since there is no Yamaha CD device upgrade besides that one, you may as well open that and build yourself an upgrade, and test to see what each function does.
Also, since they all decode to NEC1 Device
121 functions, you can try built-in setup codes
CD:0036, or CD:0888.
Edited after whompus pointed out a stupid error I made 
Posted: Mon Feb 13, 2006 5:10 pm
by whompus
Are you sure Capn?
I come up with nec1 device 121 which matches audio code 0036 and is in a lot of ofa remotes.
Posted: Tue Feb 14, 2006 2:38 am
by Capn Trips
whompus wrote:Are you sure Capn?
I come up with nec1 device 121 which matches audio code 0036 and is in a lot of ofa remotes.
Uhh... YEAH! That's it 121 - that's what I meant!
Posted: Tue Feb 14, 2006 2:51 pm
by whompus
Capn Trips wrote:
Edited after whompus pointed out a stupid error I made
Nothing stupid about typos my friend. You have most likely noticed I make them often.