JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

New Mill4 version discovered

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
jamesgammel
Exile Island Resident


Joined: 03 Aug 2003
Posts: 394
Location: Gillette, Wyoming

                    
PostPosted: Sun Nov 30, 2003 3:24 pm    Post subject: New Mill4 version discovered Reply with quote

Thanks to John Head, we've uncovered yet another version of the Millenium 4 remote. We haven't ascertained yet if it's "officially' a B02 or B03. However, thus far we've found out that the advcode address start is 01A versus the 01B for the B00, and 01C for the B01/B04. It does use an epoxy Blob like the B00 and B01, unlike the B04 which has a "real" chip for the MCU. More testing will tell if other rdf changes are going to be needed. In time, a new RDF will be posted in the RDF folder at yahoo (aren't you so thrilled Nils?) For now he's using the B00 RDF with just the advcodeadress manually changed to $01A. Externally, it's like the later B00/B01/B04 versions which have the supermacro keys labelled as ABC rather than the early B00's "F" designation.

Jim
Back to top
View user's profile Send private message Send e-mail Yahoo Messenger
Nils_Ekberg
Expert


Joined: 02 Aug 2003
Posts: 1689
Location: Near Albany, NY

                    
PostPosted: Sun Nov 30, 2003 8:29 pm    Post subject: Re: New Mill4 version discovered Reply with quote

jamesgammel wrote:
In time, a new RDF will be posted in the RDF folder at yahoo (aren't you so thrilled Nils?) For now he's using the B00 RDF with just the advcodeadress manually changed to $01A. Externally, it's like the later B00/B01/B04 versions which have the supermacro keys labelled as ABC rather than the early B00's "F" designation.

Jim

Exciting, that will put us at an even 100 active RDF's. Let me know how the testing goes.
_________________
Nils
Files Section
Diagnosis File Section
Back to top
View user's profile Send private message Send e-mail
jamesgammel
Exile Island Resident


Joined: 03 Aug 2003
Posts: 394
Location: Gillette, Wyoming

                    
PostPosted: Sun Nov 30, 2003 9:24 pm    Post subject: Reply with quote

There's a few details still to be worked out. Using YM, we were able to confirm that his needs a different rdf, with at least the advancecodes address changed to $01A. The other minor details still need to be examined, but we ran out of time for the day. IE, the macro lock device, etc. It may end up the B01 with the advcode address changed will fit better. As far as I can see, that and if it has cable lock may be the two major things to examine yet. I may just email you the new rdf and you can do your thing and post it when you do a update. may need to adjust the "identification" for all three to keep them in sync with each other.

Jim
Back to top
View user's profile Send private message Send e-mail Yahoo Messenger
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control