View previous topic :: View next topic |
Author |
Message |
squirrelz
Joined: 27 Nov 2003 Posts: 4 Location: Sheffield, UK |
Posted: Thu Nov 27, 2003 4:44 am Post subject: URC 7560/7562 Menu Mode problems |
|
|
My first posting so please be gentle
I've got a couple of One4All 6's (7560 and 7562), and they've been fine with normal devices, but we've recently got a Pace 2000 digital cable STB.
I bought a JP1 cable kit (which worked first time when I built it up) to download the necessary protocol upgrade to the remotes (as I couldn't get the internet download to work).
To cut the waffle short, it all works fine, but the wife can't get to grips with the "menu mode" so I need to turn it off and remap the Mute and AV buttons to perform the Select and Exit functions all the time.
I've tried this, but they just don't do anything, so I'm doing something wrong somewhere as I've seen postings from people saying that they've done exactle this and it works.
I've got the extender loaded and it seems to work ok, I can turn Menu mode off, but the 2 keys don't do anything when I've mapped them to the hex codes for the functions I want. They do work fine when menu mode is turned on and active.
Help!!! |
|
Back to top |
|
|
damir
Joined: 01 Oct 2003 Posts: 102 Location: Croatia |
Posted: Thu Nov 27, 2003 7:35 am Post subject: |
|
|
In KM on Buttons sheet assign Select function to Mute and Enter buttons,
and assign Exit function to AV and Exit buttons. |
|
Back to top |
|
|
squirrelz
Joined: 27 Nov 2003 Posts: 4 Location: Sheffield, UK |
Posted: Thu Nov 27, 2003 7:44 am Post subject: |
|
|
I've not managed to get all the data out of IR and into KM, are there any guides on how to do this? |
|
Back to top |
|
|
|