View previous topic :: View next topic |
Author |
Message |
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Thu Oct 25, 2012 7:25 pm Post subject: |
|
|
You might as well give them to us all up front. There is no simple way for you to figure out what the OBC is really going to be, from the decode. The midframe burst combined with the phase encoding, is giving decodeIR fits. |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Fri Oct 26, 2012 1:56 am Post subject: |
|
|
OK, file updated with all buttons. Sorry to lumber you with that amount of work |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Oct 26, 2012 7:08 am Post subject: |
|
|
alanrichey wrote: | OK, file updated with all buttons. Sorry to lumber you with that amount of work |
I appreciate your trying to save us work. In that spirit, I have translated these to IR filles so the decoding experts can use the IR tools to find the 1's and 0's.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11446
I think this is going to be a very complicated executor. I hope that the person you are helping will stick through the process. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Oct 26, 2012 8:28 am Post subject: |
|
|
This protocol reminded me of something that I worked on a while back.
Ken had posted a Entone signal that had decoded as Replay in the protocol decode section. I had arrogantly moved this to the slingbox forum, only to find that these replay decodes wouldn't respond to replay codes. Then I couldn't find it, because it wasn't in the protocols decode forum, so I had to move it back, so that I could find it again.
http://www.hifi-remote.com/forums/viewtopic.php?t=14247 _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21239 Location: Chicago, IL |
Posted: Fri Oct 26, 2012 10:45 am Post subject: |
|
|
Here are my files:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11447
The zip file contains:- the IR files that Vicky created
- the text files where I manipulated the learns t get the binary
- an Excel file where I convert the binary to hex and decimal
- the PB file
- the KM file
- an RM file derived from the KM file
- Slingbox binary files
_________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Oct 26, 2012 12:54 pm Post subject: |
|
|
Hey Rob, I tested the output and the midframe burst seems to be too big and in the wrong place.
Do you want me to follow through with the debugging, or do you want to do it? _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21239 Location: Chicago, IL |
Posted: Fri Oct 26, 2012 4:45 pm Post subject: |
|
|
Could you follow thru please. What does the mid-frame burst look like? It should be -880 +880 (plus of course, the times may get merged with the pair that precedes or follows).
Could you post an IR file of the results? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21239 Location: Chicago, IL |
Posted: Fri Oct 26, 2012 6:29 pm Post subject: |
|
|
Duh! The mid-frame burst thing isn't going to work here because the pair needs to be sent reversed. My code will generate +880 -880 when it should be generating -880 +880. We will need to re-work the ReplayTV protocol to get an executor for this. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Oct 26, 2012 6:44 pm Post subject: |
|
|
Yes, it needs to be reworked. I think besides reversing, we might be missing some half bits around the midframe burst.
Here is a picture of the comparisson for those of us that use the etch-a-sketch approach.
Uploaded with ImageShack.us
These two ICTs are here
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11449
I suppose you wanted the whole set, but I'm sitting in the car and don't have my JP1 tools with me. The weather here is foul, or I'd go back and get them to make a proper post. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21239 Location: Chicago, IL |
Posted: Fri Oct 26, 2012 10:28 pm Post subject: |
|
|
Once I figured out the mid-frame was wrong, I didn't need the files any more. Basically, I just need to grab the code for the Replay signal and extend it.
And you need to get internet service! _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sat Oct 27, 2012 12:03 am Post subject: |
|
|
The Robman wrote: | Once I figured out the mid-frame was wrong, I didn't need the files any more. Basically, I just need to grab the code for the Replay signal and extend it.
|
I was thinking the same thing, but the Replay uses 1 bit for every 440us. Isn't this signal too long to do that? Isn't the DCBuf in the samsung chip limited to 10 bytes?
Quote: |
And you need to get internet service! |
Don't I though! Especially when there are 50 mph winds and driving rain! _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21239 Location: Chicago, IL |
Posted: Sat Oct 27, 2012 10:57 am Post subject: |
|
|
vickyg2003 wrote: | I was thinking the same thing, but the Replay uses 1 bit for every 440us. Isn't this signal too long to do that? Isn't the DCBuf in the Samsung chip limited to 10 bytes? |
I haven't had a chance to re-visit the Replay executor yet, but it does require the bit doubling to be done before you enter, so John's version might not work, we may need to go back to the original UEI version, or at least the version of it that I modified to only use 1 variable byte, because that version did the bit doubling in the executor, so it used less input variables. The drawback is that the executor is much larger, which might limit how many buttons you can include in a Slingbox upgrade. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21239 Location: Chicago, IL |
Posted: Sat Oct 27, 2012 4:21 pm Post subject: |
|
|
OK, I just revisited the old $0092 executor and I see what you mean, I thought it was sending the pairs manually but I see that it's using the IR Engine after the bits are doubled, so it would need more than 10 input parms.
Maybe the way to do it is to break the signal into two.
Here's the Entone signal:
+2640 -880; 1110 -880 +880 11100110 00000011 10010110 11111111 11111111 1111 00000111 0000 -130000
Part one could be:
+2640 -880; 1110 -880
part two could be:
+880 11100110 00000011 10010110 11111111 11111111 1111 00000111 0000 -130000 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21239 Location: Chicago, IL |
Posted: Sat Oct 27, 2012 6:00 pm Post subject: |
|
|
OK, I tried re-building the ReplayTV executor using the above concept (because I could test it on my ReplayTV) and guess what, I did it and it works!!!
Here are the KM and PB files:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11450
We can now use this to build an Entone executor. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|