JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

HD Tivo owners.... are you using 0618?
Goto page 1, 2  Next
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
hihostevo



Joined: 07 Sep 2004
Posts: 30
Location: Las Vegas, NV/Cedar Hills, UT

                    
PostPosted: Wed Aug 17, 2005 11:54 am    Post subject: HD Tivo owners.... are you using 0618? Reply with quote

Hi, I was reading about a problem one person was experiencing with his HD-Tivo being slow to respond to his JP-1 remote...

However, they never mentioned which codes they were starting with...

I was wondering are you folks with HD Tivo's using the 0618 code in your JP1 remote?

Thanks,

Steve
_________________
There are Two Theories for arguing with a woman..., neither one works!
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Wed Aug 17, 2005 12:22 pm    Post subject: Reply with quote

All Tivos, except the Sony and Toshiba models, respond to the same signal set (which corresponds to the VCR/0618 and SAT/1142 setup codes).
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
hihostevo



Joined: 07 Sep 2004
Posts: 30
Location: Las Vegas, NV/Cedar Hills, UT

                    
PostPosted: Wed Aug 17, 2005 12:32 pm    Post subject: Reply with quote

Thank you.................

now where is the delete button? Embarassed

Interesting......... I can delete this second post... but do not have the option for deleting the first post??
_________________
There are Two Theories for arguing with a woman..., neither one works!
Back to top
View user's profile Send private message
utmba95



Joined: 15 Nov 2003
Posts: 40
Location: Austin, TX

                    
PostPosted: Fri Oct 21, 2005 3:29 pm    Post subject: Reply with quote

Hi,

I just bought an HR10-250 HD dtivo, and indeed it doesn't work well at all with the URC-6131 extender. The HR10-250 works perfectly with the original Tivo remote, but it ignores about half of the commands from the URC-6131. It acts as if the batteries are low, but they aren't. If I hold the remote right up to the Tivo box, it recognizes the commands pretty well.

Any ideas how to fix this? I love my URC-6131 and am dying to start using it again.

Thanks.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Fri Oct 21, 2005 4:59 pm    Post subject: Reply with quote

utmba95 wrote:
I just bought an HR10-250 HD dtivo, and indeed it doesn't work well at all with the URC-6131 extender.

Are you saying that it does work with the URC-6131 WITHOUT the extender? Are you 100% positive that you are using good batteries?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
utmba95



Joined: 15 Nov 2003
Posts: 40
Location: Austin, TX

                    
PostPosted: Sun Nov 13, 2005 9:34 pm    Post subject: Reply with quote

I finally got around to trying the 6131 WITHOUT the extender, and it doesn't work all of the time either. This is a REALLY strange deal. About 75% of the time the URC 6131 works fine, just like the original remote. However, sometimes the TIVO gets into a state where it ignores between 50% and 100% of the button presses from the 6131. During that time it responds perfectly fine to the original remote. I have two 6131s so I programmed one for the extender and one without. It was ignoring both of them last night, but the original remote worked fine. (Hit page up on first 6131 - nothing; hit page up on second 6131 - nothing; hit page up on OEM remote and it pages up). I cannot correlate when it doesn't work to any activity such as recording, etc. I had to watch TV for 3 hours before it got into that mode.

This is really annoying. I realize it's not a "JP1" question, but I'm dying to get this thing working again.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sun Nov 13, 2005 10:19 pm    Post subject: Reply with quote

If the original remote always works and the 6131 only sometimes works, then it is a JP1 question because there's something not right in the 6131s programming, but I have no idea what that might be because it seems to be working for everyone else.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
utmba95



Joined: 15 Nov 2003
Posts: 40
Location: Austin, TX

                    
PostPosted: Mon Nov 14, 2005 11:29 am    Post subject: Reply with quote

Here's another test. I used my URC-6800 to learn some buttons from both the 6131 and the original Tivo remote. Page up and page down read back exactly the same except that the frequency is off by a little. However, FF and PLAY have some differences. Next time it gets into the bad state I'll try playing the learned signals to see which ones work.

Is this a significant difference? BTW, I've searched the net and there are others complaining of poor performance with this remote on the HR10-250 HD Tivo.

Fast Forward button
Tivo-NEC1 unit=0, Device 133, Sub 48, OBC 36, Hex DB, EFC 212

URC-6131

Frequency 37914
+8992 -4496 +552 -1676 +552 -570 +552 -1676 +552 -570 +552 -570 +552 -570 +552 -570 +552 -1676 +552 -570 +552 -570 +552 -570 +552 -570 +552 -1676 +552 -1676 +552 -570 +552 -570 +552 -570 +552 -570 +552 -1676 +552 -570 +552 -570 +552 -1676 +552 -570 +552 -570 +552 -570 +552 -570 +552 -570 +552 -570 +552 -1676 +552 -570 +552 -1676 +552 -1676 +552 -49116 +8992 -2272 +552 -98350

+8992 -2272 +552 -98350

Original Remote

Frequency 37735
+9002 -4498 +550 -1700 +550 -574 +550 -1700 +550 -574 +550 -574 +550 -574 +550 -574 +550 -1700 +550 -574 +550 -574 +550 -574 +550 -574 +550 -1700 +550 -1700 +550 -574 +550 -574 +550 -574 +550 -574 +550 -1700 +550 -574 +550 -574 +550 -1700 +550 -574 +550 -574 +550 -574 +550 -574 +550 -574 +550 -574 +550 -1700 +550 -574 +550 -1700 +550 -1700 +550 -45020 +9002 -2266 +550 -96716

+9002 -2266 +550 -96716
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Mon Nov 14, 2005 12:05 pm    Post subject: Reply with quote

The only difference that might be significant is the lead out time, but even with there, the 4k difference is only 10% off, which should be within the acceptable margin of error.

Here are the comparisons...

Frequency
URC 37.914
org 37.735

lead-in pair
URC +8992 -4496
org +9002 -4498

1 pair
URC +552 -1676
org +550 -1700

0 pair
URC +552 -570
org +550 -574

lead-out pair
URC +552 -49116
org +550 -45020

repeat string
URC +8992 -2272 +552 -98350
org +9002 -2266 +550 -96716

Looking at the protocol code, I see that the lead-out time is defined using the "OFF as total" option. Maybe that's the problem, maybe the HR10-250 HD Tivo uses a fixed leadout OFF time.

In case you want to try experimenting with the code yourself, here's a PB file for it...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=2440

Could you learn all the buttons from the HR10-250 remote and post the resulting IR files. Also, please confirm that the learned buttons work just as well as the original remote.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
utmba95



Joined: 15 Nov 2003
Posts: 40
Location: Austin, TX

                    
PostPosted: Mon Nov 14, 2005 3:59 pm    Post subject: Reply with quote

IR files of learned keys are posted here:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=2441
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=2442

Tivo isn't acting up right now, so I can't test the learned keys.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Mon Nov 14, 2005 10:20 pm    Post subject: Reply with quote

Try using this protocol upgrade to see if it fixes things.

Upgrade protocol 0 = 01 11 (S3C8+) Tivo - official 1-byte code (upd) (PB v3.11)
44 8D 31 8B 15 8A 5C 08 08 01 21 01 06 01 21 03
31 57 FD 11 A7 08 B7 08 02 08 E4 05 07 56 07 F0
08 06 60 C0 56 C0 0F 44 C0 07 F6 01 46 46 29 01
C6 1C BC DE 8D 01 46
End


Also, could you re-learn the following buttons for me please...
record
9
macro2 (clear)
enter
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
utmba95



Joined: 15 Nov 2003
Posts: 40
Location: Austin, TX

                    
PostPosted: Mon Nov 14, 2005 11:14 pm    Post subject: Reply with quote

So I just add this protocol and change KM from using Tivo (Advanced) to Tivo (Official)?

I did get the Tivo in the bad state and verified that the commands learned from the original remote worked.

I tried learning these commands many times because they didn't fit the pattern of the others, but they still look weird. I checked that ENTER does not repeat on the original remote - one blink and that's it.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=2443

Do you still sell EPROMs? I may need another one.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Tue Nov 15, 2005 8:36 am    Post subject: Reply with quote

I assumed that you were using the official so that's I was basing my analysis on. It might have ben a good idea to mention which protocol you were using from the outset.

But regardless, yes, you would need to switch KM to the official protocol and copy over the upgrade as normal, then copy the protocol from this thread over to IR also.

But before you test the protocol that I just wrote, you should test the official upgrade without adding a protocol, just to confirm that it acts the same way as the old "Advanced" protocol (which I need to try and get deleted).

If you confirm that the official protocol also has problems and that my protocol fixes these problems, I will forward my code onto UEI so they add it to their database.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
gfb107
Expert


Joined: 03 Aug 2003
Posts: 3411
Location: Cary, NC

                    
PostPosted: Tue Nov 15, 2005 9:10 am    Post subject: Reply with quote

Rob, this new protocol works much better for my HR10-250.

I just tested with 2 URC-6131s. One has the updated protocol, one does not (it uses the builtin protocol). The one without the update works only sporadically, while the one with the update works consistently.

I've also not noticed any issue uses the updated protocol with my older DSR6000.
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)
Back to top
View user's profile Send private message Visit poster's website
utmba95



Joined: 15 Nov 2003
Posts: 40
Location: Austin, TX

                    
PostPosted: Tue Nov 15, 2005 10:21 am    Post subject: Reply with quote

Cool, it looks like Greg did the testing for me. I only have to dig into JP1 stuff once a year or so, so I didn't even know which protocol I was using. It all started coming back last night as I waded through KM again.

Thanks a lot for the update! It is so nice to have ONE remote again.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control