JP1 Remotes

mtakahar · Expert Joined: 03 Aug 2003 Posts: 281

Josh,

We can use either ReplayTV 5000 extender 1 or TiVo extender 2 as the basis. TiVo extender adds KeyMove, secondary shift (aka xshift) and special protocols such as LKP, but the free space in the EEPROM will be less. Which one do you prefer?

Either way, open new thread in the extenders forum and we can discuss more details there.

Hal

The Robman · Posted: Mon Jul 04, 2005 11:02 am Post subject:

Also, just FYI, this remote has a 1k chip installed. If I get a chance, I will replace it with a 2k chip which will give Hal a bit more freedom with the extender.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

The Robman · Posted: Mon Jul 04, 2005 12:21 pm Post subject:

I've soldered in a 2k chip and have created a new 2k RDF...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=1902
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

joshville · Joined: 13 Jun 2005 Posts: 34

I've found some documentation on the S3C8 processor online, and I'm trying to figure out just how the extenders work. It looks sort of like (and please correct me if I'm wrong) that the special protocol sort of "hijacks" control of the processor. Someone has figured out the addresses of subroutines stored in the processor's ROM that handle the menial type tasks of checking for button presses, actually pulsing the infrared LED, etc, and how to return control back to the extender after the call instead of to the standard program in the remote's ROM. Is that sort of correct?

-Josh

The Robman · Posted: Mon Jul 04, 2005 2:40 pm Post subject:

Pretty much
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

joshville · Joined: 13 Jun 2005 Posts: 34

Whoops, I didn't even notice until after my last post that the thread had added a second page! Thank you, Rob, for upgrading the EEPROM. I greatly appreciate it.

Here is the new thread in the Extenders forum as suggested by Hal

Thanks!

-Josh[/url]