JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Sony Video 7 Discrete Code Solution
Goto page Previous  1, 2, 3  Next
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Tue May 03, 2005 9:17 pm    Post subject: Reply with quote

You can find all the Sony codes you could possibly want here:
http://www.hifi-remote.com/sony/

In particular, the TV codes are here:
http://www.hifi-remote.com/sony/Sony_tv.htm

You'll notice that while most of the TV functions come from device codes 1 and 164 (ie, the TV/0000 setup code) the "video 7" function comes from the 151 device code.

Therefore, you could either use one of the Sony combo protocols, or you could create a stand alone upgrade using device code 151, then program a key move that points to it that uses OBC 66 (which is EFC 032 or 024).
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
smalis



Joined: 04 May 2005
Posts: 19

                    
PostPosted: Wed May 04, 2005 2:53 pm    Post subject: Sony Video 7 Discrete Code Solution Reply with quote

I have a Sony 55" KDF-55WF655 HD TV, which uses TV Code 0000 on my 15-2116 remote. To add a discrete Video 7 code (for the HDMI input), you need to do the following.

Download "Sony-HD and Plasma -Video7_Device_151_and_119.txt" from the "Files > 3. Device Codes > TV" section of the JP1 group at Yahoo (http://groups.yahoo.com/group/jp1/).

"LOAD" this file into the Keymap Master Program using the LOAD button.

Make sure the correct remote is selected in the top left drop down box.

Copy the "Device Upgrade Code" to the clipboard using the copy button in the "Device Upgrade Code" box.

Run IR, and load your remote configuration (or download it from your remote).

Go to the Devices tab and click on ADD

Paste the upgrade code into the top box. The TYPE should change to CBL and the Setup Code should change to 1999. Click on OK.

Go to the General tab and assign an unused device button (I used AUX) to TYPE: CBL and Code: 1999.

Upload to your remote. The AUX device should now select Video 7 when you press the TV/VIDEO button. You can of course move this button to an unused button within the TV device if you wish.

You can check what other button functions you will now have in the AUX device by looking at the Buttons tab in Keymaster (so long as the file you loaded earlier is still loaded).

Have fun!!
_________________
Stuart Malis
Back to top
View user's profile Send private message Send e-mail
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Wed May 04, 2005 3:57 pm    Post subject: Reply with quote

Why don't you load that file into the new file section and then provide an actual link to it.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
smalis



Joined: 04 May 2005
Posts: 19

                    
PostPosted: Wed May 04, 2005 4:11 pm    Post subject: Reply with quote

OK, I think I did that right. I uploaded an IR file with just the one device upgrade, which adds a discrete Video 7 input key (the TV/Video key of the AUX device), for Sony KDF-55WF655 (and likely other) Sony HD TV's.

The file is called "Sony KDF-55WF655 Video7 Input."

It is in the TV section of the "Device Upgrades" File area. The url is http://www.hifi-remote.com/forums/dload.php?action=file&file_id=1764
_________________
Stuart Malis
Back to top
View user's profile Send private message Send e-mail
smalis



Joined: 04 May 2005
Posts: 19

                    
PostPosted: Wed May 04, 2005 4:13 pm    Post subject: Reply with quote

BTW, the "Sony-HD and Plasma -Video7_Device_151_and_119.txt" keymap file is in the file section here, at http://www.hifi-remote.com/forums/dload.php?action=file&file_id=1165
_________________
Stuart Malis
Back to top
View user's profile Send private message Send e-mail
tabish



Joined: 15 Sep 2003
Posts: 10

                    
PostPosted: Mon May 16, 2005 8:33 am    Post subject: Reply with quote

I've got a 60XS955, has anyone found the code for Video 8 on these sets?
_________________
-------
TAB
Back to top
View user's profile Send private message AIM Address
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Mon May 16, 2005 10:24 am    Post subject: Reply with quote

tabish wrote:
I've got a 60XS955, has anyone found the code for Video 8 on these sets?

I checked Rob H's site and he doesn't have the code listed, so I'm guessing that it hasn't been found yet (if indeed it even exists). So my recommendation would be to try OBCs from the Sony 151 device code. I would start with OBC 67 as "Video 7" is OBC 66.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
hyimted



Joined: 02 Apr 2004
Posts: 25

                    
PostPosted: Fri May 27, 2005 4:42 pm    Post subject: sony tv, video 7 input, and urc-8811 Reply with quote

hi all -

i'm trying to find a discrete code for the video7 (hdmi) input on my sony 60xs955.

i've searched the files section and downloaded every sony file. the only one that even powered on my tv was the "Sony_KV-35V68_Upgrade_8910" file - but that only goes to video6. the rest of them wouldn't even power on my tv???

i also tried the video7 trick at (http://www.hifi-remote.com/forums/viewtopic.php?t=4537) which i would have thought worked. i made sure to change my remote type in km before copying to ir.

anyway, if anyone has any ideas or can figure out what i'm doing wrong ... that would be awesome.

thx,

ted

----------

1. Device: sony 60xs955
2. Type of device: tv
3. JP1 Remote model: urc-8811
4. JP1 user? yes
5. Still have original remote? (yes/no) yes
6. Checked the file section? (yes/no) yes
7. Checked the Pronto file section (at R/C)? (yes/no) n/a
8. Partially working setup code? (see 'A' below) tv / 1000
9. Learning remote question? (see 'B' below) n/a

A. Partially working setup code (from the Sony_KV-35V68_Upgrade_8910 file)
Remote: URC-881x / 801x / 601x
Device Type: TV
Setup Code: 1000
Button Codes: OBC
SURR = Select: NO

DigitMap Enabled
Protocol Name: Sony12/15
Device1: 1
Device2:

Protocol ID: 00 CA
Fixed Data: 80 80 00


B. Learning remote question.
n/a
Back to top
View user's profile Send private message
hyimted



Joined: 02 Apr 2004
Posts: 25

                    
PostPosted: Fri May 27, 2005 4:57 pm    Post subject: Reply with quote

hi all -

i tried this with my urc-8811 remote, but it didn't appear to work. anyone have any guesses? i know the original poster was using a 15-2116 but i wasn't sure if that mattered.

i did make sure to change my remote type before copying the data from km to ir.

thx,

ted
Back to top
View user's profile Send private message
gjarboni
Expert


Joined: 20 Sep 2003
Posts: 294
Location: Columbia, MD

                    
PostPosted: Fri May 27, 2005 6:01 pm    Post subject: Reply with quote

hyimted wrote:
hi all -

i tried this with my urc-8811 remote, but it didn't appear to work.


Since this topic has broadened a bit, you should be more specific. What exactly didn't work? Creating a keymove for the Video 7 discrete code, trying to use the Video 7 code in a device, trying to use said code in a macro, trying to balance your remote on your nose Smile

If you think you might have done something wrong, uploading the contents of your ir file to the diagnostics area will let one of the experts take a look at it.
Back to top
View user's profile Send private message Send e-mail AIM Address
gjarboni
Expert


Joined: 20 Sep 2003
Posts: 294
Location: Columbia, MD

                    
PostPosted: Fri May 27, 2005 6:04 pm    Post subject: Re: sony tv, video 7 input, and urc-8811 Reply with quote

hyimted wrote:
i'm trying to find a discrete code for the video7 (hdmi) input on my sony 60xs955.


If you've done everything right, then it seems likely that your TV doesn't have a discrete code for Video 7. But this is easily worked around. In a macro just use, Video 6, followed by TV/Video to select Video7.
Back to top
View user's profile Send private message Send e-mail AIM Address
hyimted



Joined: 02 Apr 2004
Posts: 25

                    
PostPosted: Fri May 27, 2005 7:12 pm    Post subject: Reply with quote

hmmm...that's an interesting trick....i think that may actually work. great idea...i'll give it a try. thanks!

but if anyone has ideas on how to get the vid7 code, i'd still like to utilize it. Smile
Back to top
View user's profile Send private message
hyimted



Joined: 02 Apr 2004
Posts: 25

                    
PostPosted: Sat May 28, 2005 1:15 am    Post subject: Reply with quote

yup....creating the keymore didn't work. the rest of the functions (power, etc) seem to work fine. it's just the vid7 discrete code that didn't take. however, your suggestion from my other post seemed to work pretty well. i think it'll make a nice workaround until i can get this issue resolved. Smile
Back to top
View user's profile Send private message
hyimted



Joined: 02 Apr 2004
Posts: 25

                    
PostPosted: Sat May 28, 2005 2:27 pm    Post subject: Reply with quote

gjarboni - that trick worked great...thanks for the tip! Smile
Back to top
View user's profile Send private message
gjarboni
Expert


Joined: 20 Sep 2003
Posts: 294
Location: Columbia, MD

                    
PostPosted: Sat May 28, 2005 9:33 pm    Post subject: Reply with quote

No problem, I'm glad it worked. It seems likely that your TV doesn't respond to the Video7 code (even though it has a Video7 mode). Unfortunately, we've seen this more than a few times.
Back to top
View user's profile Send private message Send e-mail AIM Address
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Goto page Previous  1, 2, 3  Next
Page 2 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control