Discrete audio input Code for Pioneer vsx-1015

kreed · Post by **kreed** » Sat Apr 16, 2005 1:41 pm

This is a new receiver out from pioneer that is very similar to the 1014. I have searched and checked all the pioneer files at the yahoo group but cannot find this. what I need are discrete codes to select the analog and digital inputs of the receiver. info follows

1. Device: Pioneer vsx-1015
2. Type of device: audio/video receiver
3. JP1 Remote model: 15-2116
4. JP1 user? No but one is on the way
5. Still have original remote? yes
6. Checked the file section? yes
7. Checked the Pronto file section? yes
8. Partially working setup code? AMP/118
9. Learning remote question? The original Pioneer remote does not offer this function.

on the pioneer remote there is a button called "signal select" that cycles thru auto-analog-digital. however none of the "signal select" codes that I've found in the pioneer files including the pioneer master file work.

Thanks for any help.

kreed · Post by **kreed** » Sat Apr 16, 2005 3:05 pm

I should add that AMP/0013 doesn't control the receiver at all but that setup code will accept the 118 EFC and it works. 118 is discrete VIDEO1 input by the way.

RCVR 1023 does work with this receiver.

Post by **The Robman** » Sat Apr 16, 2005 4:13 pm

Check the upgrade files for the other models of Pioneer receivers to see if they have discrete input codes included, then when your cable arrives, give them a try.