JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Need longer duration signals for Sampo LCD TV

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
willcodeforbeer



Joined: 04 Nov 2003
Posts: 7

                    
PostPosted: Wed Nov 05, 2003 12:03 am    Post subject: Need longer duration signals for Sampo LCD TV Reply with quote

I have a new Sampo LME-17S3 LCD monitor/TV (great deal at Costco). I'm using Rob's device file "Sampo-PME42S6-plasma.txt" on my 15-2116 (with ext2). It works fine to control the TV, but I have to hold down each remote button to get the TV to register the IR command. In other words, the signal durations are too short.

It looks like a lot of effort to use the device combiner protocol to extend every signal (if it's even possible with this weird Sampo protocol). Is there a simple way to modify the protocol itself to lengthen the signals?

I've poked around trying to learn about protocols, but I haven't found much to read on-line.

Any help would be appreciated.

- Jeff
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Wed Nov 05, 2003 12:22 pm    Post subject: Reply with quote

Try replacing the protocol provided by KM with this one...

Upgrade Protocol 0 = 01 65 (S3C8+)
43 8C 13 8B 12 8D 45 06 06 01 A6 01 92 01 A6 04
D6 40 5A 06 98 06 79 08 04 37 00 03 E6 03 48
E6 0D 05 8D 01 46
End

The number is red is the minimum number if times the signal should repeat, you may need to adjust it higher or lower. If you get it exactly right, you should be able to just peck the remote button and the signal will be held for long enough to work the device each time.

Remember that this is hex, so if you go above 09 the next value is 0A not 10.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
willcodeforbeer



Joined: 04 Nov 2003
Posts: 7

                    
PostPosted: Thu Nov 06, 2003 4:20 pm    Post subject: Reply with quote

Thanks, Rob. Worked great. The right value turned out to be 01. I'll try to post the device file (to Yahoo) when I get a chance.

- Jeff
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Thu Nov 06, 2003 4:27 pm    Post subject: Reply with quote

Congrats
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control